Contact | X10.com
Please login or register.

Login with username, password and session length

Author Topic: RR501 Transceiver  (Read 7981 times)

Duck69

  • Hero Member
  • *****
  • Helpful Post Rating: 36
  • Posts: 246
  • Unselfish Love
RR501 Transceiver
« on: July 12, 2006, 10:59:51 PM »
Would using a RR501 conflict with a CM15A ?
Would  a RR501 on the same house code as a DS7000 cause any problems ?
Will using 2 RR501's on the same house code extend the range of the signal to a module ?
   eg: one RR501 at point A another at point B 60 feet away from point A and the module at point C 15 feet away from point B.

Jim
Logged
"I'm not lazy, I'm just Resistant to exertion."

Brian H

  • Community Organizer
  • Hero Member
  • ***
  • Helpful Post Rating: 305
  • Posts: 13295
Re: RR501 Transceiver
« Reply #1 on: July 13, 2006, 04:34:17 PM »
The only way it MAY is if both are on the same House Code and receive the same RF signals. They are polite and one should wait for the other to finish. Some here have an RR501 in the other end of the home to cover poor spots.
Same for the DS7000.
The extending the distance with one in the middle would not extend the signal to C unless the A signal was lost and the B RR501 received the RF signal and it then got to C.
Others that have actually done this maybe able to give added details as I know there RR501s are being used with CM15As.
Where did you find RR501s? Last time I looked they where not on the web anymore. OH maybe the RCA venison the Midnight Bandit id pushing  ;D
Logged

TakeTheActive

  • Hero Member
  • *****
  • Helpful Post Rating: 126
  • Posts: 1047
  • Old !@#$% Tinkerer!
Re: RR501 Transceiver
« Reply #2 on: July 13, 2006, 09:07:41 PM »
Quote from: Brian H on July 13, 2006, 04:34:17 PM
Where did you find RR501s? Last time I looked they where not on the web anymore.

Quote from: Brian H on July 13, 2006, 04:34:17 PM
OH maybe the RCA venison the Midnight Bandit id pushing   ;D

You'll have to check the date code - SEARCH the comp.home.automation newsgroup to be sure... ;)
Logged
Low Post Count != Low Knowledge - High Post Count != High Knowledge ;)

ADVICE TO X-10 NEWBIES FROM AN X-10 OLD-TIMER

Brian H

  • Community Organizer
  • Hero Member
  • ***
  • Helpful Post Rating: 305
  • Posts: 13295
Re: RR501 Transceiver
« Reply #3 on: July 14, 2006, 06:50:34 AM »
The RR501 is the better Transceiver over the TM751 anyday. I got mine in the Original Active Home Kit and an extra when X10 was still selling them alone. A few weeks ago X10 was actually selling the original Active Home Kits for like dirt cheap. I still have two new AH Kit in storage as most fo my X10 stuff is gone and I am going to a different format Automation system.
Logged

Brian H

  • Community Organizer
  • Hero Member
  • ***
  • Helpful Post Rating: 305
  • Posts: 13295
Re: RR501 Transceiver
« Reply #4 on: July 15, 2006, 10:23:05 AM »
Not too familiar with the kit. Someone with long associations with X10 seemed to think not all of the RCA kits had the RR501 in them.
I will brave the web popups and give a look.
Logged

steven r

  • Advanced Member
  • Hero Member
  • ******
  • Helpful Post Rating: 74
  • Posts: 2189
  • Halloween with X10
Re: RR501 Transceiver
« Reply #5 on: July 15, 2006, 06:59:06 PM »
Quote from: Brian H on July 15, 2006, 10:23:05 AM
...I will brave the web popups and give a look.
Quick standby with the 1st aid. He's volunteered to go where no man should have to go.
Logged
BVC let's me tell my camera where to go!
:) Murphy is my beta testing pal. He helps me find problems whether I like it or not. :)

Brian H

  • Community Organizer
  • Hero Member
  • ***
  • Helpful Post Rating: 305
  • Posts: 13295
Re: RR501 Transceiver
« Reply #6 on: July 16, 2006, 06:37:58 AM »
I am safe ;D. Only thing was; the adventure didn't find the item in question. I sure love the layout of x10.com.
Logged

Brian H

  • Community Organizer
  • Hero Member
  • ***
  • Helpful Post Rating: 305
  • Posts: 13295
Re: RR501 Transceiver
« Reply #7 on: July 16, 2006, 01:47:49 PM »
Unless the photo and description are wrong. I think it is just the older cm11a with a RCA Label.
Logged

Dan Lawrence

  • Hero Member
  • *****
  • Helpful Post Rating: 68
  • Posts: 3991
Re: RR501 Transceiver
« Reply #8 on: July 17, 2006, 02:35:37 PM »
Automatic Outlet  http://www.automatedoutlet.com/home.php will sell you a RR501 for $23.49 with shipping.  X10 will only sell it as part of the RC5000 set, which has the 16 unit Remote Control (RT504) included.  Go to Automatic Outlet if you want just a RR501.
Logged
I don't SELL this stuff... BUT I sure do ENJOY using it!!!

Brian H

  • Community Organizer
  • Hero Member
  • ***
  • Helpful Post Rating: 305
  • Posts: 13295
Re: RR501 Transceiver
« Reply #9 on: July 17, 2006, 04:45:31 PM »
PAT01 is the X10PRO line of modules as you noted
I to would try Automatedoutlet.
Logged
 

X10.com | About X10 | X10 Security Systems | Cameras| Package Deals
© Copyright 2014-2016 X10.com All rights reserved.