Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[SaddleBear]

Hello,

I can connect to the MyHouse service and it works fine for a while.  I can view the cameras in my house and change between them.  After a while when I switch camera's the MyHouse Status window shows the same command being issued OVER AND OVER.   Nothing works after this point.  I have to restart the web client machine and the machine at my house in order to get this to stop.  If I restart just the web client machine the commands are still being repeated.  I suspect its a problem with the AHP USB Module but I'm not sure.  I've attached a snapshot o fthe MyHouse status window showing the repeated commands (the Weiner Cam is the camera on my dachshunds ;-).

Any help would be appreciated.
Chris
saddlebear@hotmail.com

[Tuicemen]

Are you using another transciever? that will cause the repeat commands if not configured correctly in your AHP hardware configuration. Is it always the same cam that causes this?

[SaddleBear]

I do have a transceiver in addition to the AHP module plugged in.  I forgot all about it.  I will remove it and see what happens.  Thanks for the reply!!!!!

[Tuicemen]

no problem I had forgoten about mine at one point too!