have 3 cameras going now have static ???

[GMBAL4]

hey guys I got my third camera in today and when they are all going I get a lot of static each channel are on there own letter
  camera 1 on A
  camera 2 on B
  camera 3 on C
  and now I can`t get it to come in clear now if I move the receiver around I can get each channel to come in clear??
   should I get a new receiver ??
   thanks for the help

[Brian H]

You have three wireless cameras on at the same time on different channels or three on a different House Code?

[GMBAL4]

okay Brian I`m stupid what is a house code?? I have each camera on there own letter 1 camera on a 2 n b and 3 on c
  I hope that this is correct?? house code I think is set to 1

[Dan Lawrence]

Housecodes are A thru P, uniits are 1-16.

[GMBAL4]

Then yes I have 3 cameras on different house codes is this correct??

[GMBAL4]

ANYBODY

[steven r]

I'm not a camera expert but I believe that you need to keep all your cameras on the same channel as the receiver.

[GMBAL4]

they are onthe same channel as the receiver 

[Tuicemen]

GMBAL4: set all three cams to one housecode (same code for each) then set each to there own unit number eg. 1,2 & 3.  Check under the rubber plugs of each cam that they are all set to the same channel as on the bottom of the receiver. eg. a,b,c,or d

[Brian H]

House Code as mentioned is the A-P dial on the power supply. The units are 1-16. Keep all of them in a group of four for the unit codes. Like 1-4;5-8;9-12 or 13-16. That way when one in the group is turned on the other three [if you had 4] would turn off. Only one camera can be on at a time. Also as mentioned all on the same channel A-D under the rubber plug and A-D on the receiver to match the cameras channel.

[GMBAL4]

okay i am a knucle head    I did not have the unit set correctly now that I do the cameras work and SWITCH  perfectly. Now I `ll just save up and by the new Sentinel that just came out 

PS: thanks for the help everyone!!

[Brian H]

Glad you found it and it is now working.