Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[sjx10]

I have recently purchased the full home automation set of software and the full PS561 security system.  However, I am not sure how to make the OnAlert system manage devices (when each one needs a unique address) and the security system needs all the devices to be on the same address.

How do I do this - am I just confused?

Steve

[Puck]

...(when each one needs a unique address) and the security system needs all the devices to be on the same address.

In OnAlert, yes each security device (Door/Window Sensor, Motion Detector, Remote) does require a separate House Code / Unit Code Address. But on the PS561, this does not apply... you just register them with the console via the install mode. The House Code on the PS561 is just for the security lights & sirens that you want to flash & sound.

Read through the posts that Tuicemen references here: Tips and Helpfull Suggestions!

Also read through this post for some helpful information on setting up the sensors addresses on OnAlert: Some observations