Topic: using the palm pad remote to set off a series of macros (Read 4759 times)

donutlou · « **on:** November 08, 2006, 06:19:06 PM »

how do i set it up so i can use my palm pad remote to set off a macro to set the mood in my living room. ie dim the lights on different housecodes to the same level?

KDR · « **Reply #1 on:** November 08, 2006, 06:44:29 PM »

Lets say your palm pad is set to house code "C". Create a macro and put all you modules and commands in it and then assign the macro as C1. When you press C1 On on the palm pad the macro will run.

You can do a search on the board to find out about setting up the macro and using delays, flags and things like that. Any other questions feel free to post them.

donutlou · « **Reply #2 on:** November 08, 2006, 06:50:19 PM »

thanks, ive been asking a few questions, and been getting good answers. thanks again

News:

Author Topic: using the palm pad remote to set off a series of macros (Read 4759 times)

donutlou

using the palm pad remote to set off a series of macros

KDR

Re: using the palm pad remote to set off a series of macros

donutlou

Re: using the palm pad remote to set off a series of macros