Contact | X10.com
Please login or register.

Login with username, password and session length

Author Topic: Work sometimes  (Read 3107 times)

frichmond1

  • Newbie
  • Helpful Post Rating: 0
  • Posts: 9
Work sometimes
« on: November 11, 2006, 12:00:30 AM »
Some times my signal from my CM11A works and other times it won't I tryed using a maxi controler with the same results

What do you think my problem is.

Thanks

Logged

Puck

  • Advanced Member
  • Hero Member
  • ******
  • Helpful Post Rating: 171
  • Posts: 1799
Re: Work sometimes
« Reply #1 on: November 11, 2006, 12:39:33 AM »
Most likely a signal noise, signal sucking or power line phase issue.

These are well covered topics, do a search and I'm sure you will find lots of hints & suggestions.  ;)

Let us know how you make out and if you still have problems.
Logged

Brian H

  • Community Organizer
  • Hero Member
  • ***
  • Helpful Post Rating: 305
  • Posts: 13295
Re: Work sometimes
« Reply #2 on: November 11, 2006, 06:43:10 AM »
As Puck indicated. Typical symptoms of powerline noise; signal suckers and opposite phase control issues..
Logged

TakeTheActive

  • Hero Member
  • *****
  • Helpful Post Rating: 126
  • Posts: 1047
  • Old !@#$% Tinkerer!
Re: Work sometimes
« Reply #3 on: November 11, 2006, 12:43:37 PM »
There's a Troubleshooting STICKY right at the top of the screen in the same forum that you posted in - have you read it?  :-[

PLENTY of help to be found here, already asked and answered. ;)
Logged
Low Post Count != Low Knowledge - High Post Count != High Knowledge ;)

ADVICE TO X-10 NEWBIES FROM AN X-10 OLD-TIMER
 

X10.com | About X10 | X10 Security Systems | Cameras| Package Deals
© Copyright 2014-2016 X10.com All rights reserved.