Please login or register.

Login with username, password and session length

Author Topic: Leviton 6381 Operation Inconsistent...  (Read 5363 times)

wheelsea

  • Newbie
  • Helpful Post Rating: 0
  • Posts: 7
Leviton 6381 Operation Inconsistent...
« on: November 29, 2006, 11:03:57 AM »

just installed a leviton 6381 switch. it will work when i use active home pro to turn it on or off by clicking on the switch but it will not turn on or off just by running it thru the intrerface cm15a .
any suggestions? thanks
Logged

Puck

  • Advanced Member
  • Hero Member
  • ******
  • Helpful Post Rating: 171
  • Posts: 1799
Re: Leviton 6381 Operation Inconsistent...
« Reply #1 on: November 29, 2006, 11:52:59 AM »

just installed a leviton 6381 switch. it will work when i use active home pro to turn it on or off by clicking on the switch but it will not turn on or off just by running it thru the intrerface cm15a .
any suggestions? thanks

Do you mean with a remote?

If so, take a look at this post: dim lights

Sounds like your CM15A is not set to Transceive the house code your switch is on. If this is not the problem, please provide more info;)
Logged

wheelsea

  • Newbie
  • Helpful Post Rating: 0
  • Posts: 7
Re: Leviton 6381 Operation Inconsistent...
« Reply #2 on: November 29, 2006, 03:06:01 PM »

the cma15 is set to trancieve the house code (D) that the 6381 is set to. howver i just checked the signal strength at the outlet the cma15a is plugged into and i am getting a reading of 50 mV. most all of my other outlets in the house show 200mV. I do have  a  leviton HCA02 amplifier/repeater installed
Logged

Puck

  • Advanced Member
  • Hero Member
  • ******
  • Helpful Post Rating: 171
  • Posts: 1799
Re: Leviton 6381 Operation Inconsistent...
« Reply #3 on: November 29, 2006, 03:25:26 PM »

If you can manually click the switch in AHP and it works, then the signal is getting from the CM15A to the 6381.

But I'm still not understanding what you mean by: "will not turn on or off just by running it thru the intrerface cm15a"

Please give more detail to what is not working for you. Thanks.
Logged

dave w

  • Community Organizer
  • Hero Member
  • ***
  • Helpful Post Rating: 139
  • Posts: 6116
Re: Leviton 6381 Operation Inconsistent...
« Reply #4 on: November 29, 2006, 03:46:13 PM »

the cma15 is set to trancieve the house code (D) that the 6381 is set to. howver i just checked the signal strength at the outlet the cma15a is plugged into and i am getting a reading of 50 mV. most all of my other outlets in the house show 200mV. I do have  a  leviton HCA02 amplifier/repeater installed

In your initial post, what you have described does not make sense, unless I am not reading correctly. You have said that the 6381 works when triggered by AHP (the CM15A outputs that signal) BUT the 6381 "will not turn on or off just by running it thru the interface cm15a".

So the CM15A puts out a stronger signal when triggered by AHP than when triggered by a programmed macro or a RF remote? (I am deriving that from the "but it will not turn on or off just by running it thru the intrerface cm15a" statement).

And you indicate a signal of 50mv at the CM15A outlet. Is this FROM the CM15A, or from some other unnamed source?

What is the signal level at 6381, or at least on the same branch?
Logged
"This aftershave makes me look fat"

wheelsea

  • Newbie
  • Helpful Post Rating: 0
  • Posts: 7
Re: Leviton 6381 Operation Inconsistent...
« Reply #5 on: November 29, 2006, 04:09:39 PM »

dave, puck- thanks for your time. puck, when i disconnect the cm15a from the computer and plug  it into its normal location in another room, this is when it not working.
dave -  the signal level of 50mv is from the top plug of the wall plug the cm15a is plugged into while connected to the computer. the signal level of the branch of the 6381 is 200mv.
Thanks
Logged

Puck

  • Advanced Member
  • Hero Member
  • ******
  • Helpful Post Rating: 171
  • Posts: 1799
Re: Leviton 6381 Operation Inconsistent...
« Reply #6 on: November 29, 2006, 04:23:42 PM »

when i disconnect the cm15a from the computer and plug  it into its normal location in another room, this is when it not working.

Then it sounds like you have a signal sucker and / or noise in that path between the CM15A & the 6381.


Quote
dave -  the signal level of 50mv is from the top plug of the wall plug the cm15a is plugged into while connected to the computer. the signal level of the branch of the 6381 is 200mv.

Keep in mind that some outlets have the 2 sockets on different lines (breakers). This is generally done in areas where multiple high current appliances will be used (I.E. In the kitchen).
Logged

wheelsea

  • Newbie
  • Helpful Post Rating: 0
  • Posts: 7
Re: Leviton 6381 Operation Inconsistent...
« Reply #7 on: November 29, 2006, 05:02:52 PM »

i think you are right. it just dawned on me that all source of noise is present at this particular location - computer,monitor,printer, surge protector and battery back up . moved the cm15a back to its regular location and every x10 module worked fine . i add many modfules at this time of the year for my christmas lighting and all of them are up and running.
thanks
Logged
 

X10.com | About X10 | X10 Security Systems | Cameras| Package Deals
© Copyright 2014-2016 X10.com All rights reserved.