Topic: Can use X10 230Vac/50Hz in 220Vac/50Hz ? (Read 4351 times)

pume · « **on:** November 23, 2006, 10:22:52 AM »

http://www.simplyautomate.co.uk/productDisplay.asp?prodID=3722

product Detail

Length 160mm, Width 70mm, Height 55mm
AC supply:             230VAC/50Hz
X-10 Powerline:       120 KHz/2.5vp-p
Backup battery:       2 x AAA cell (not supplied)
Backup time:          1 week typical
Events/macros stored:    25 typ/39 max

this product can use in 220VAC/50Hz

Brian H · « **Reply #1 on:** November 23, 2006, 10:48:33 AM »

Do the power connections match your countries outlets?
Most devices have a voltage tolerance. I would think that 220 VAC 50 Hz should work ok. Maybe others that have used it will give better data.

pume · « **Reply #2 on:** November 23, 2006, 11:08:06 AM »

thank

gil shultz · « **Reply #3 on:** June 13, 2007, 04:12:48 AM »

The voltages you give are nominal voltage and they have a wide tolerance. Going from the 230 to 220 should pose no problems. Most likely going the other way will be ok as well.
Gil Shultz

News:

Author Topic: Can use X10 230Vac/50Hz in 220Vac/50Hz ? (Read 4351 times)

pume

Can use X10 230Vac/50Hz in 220Vac/50Hz ?

Brian H

Re: Can use X10 230Vac/50Hz in 220Vac/50Hz ?

pume

Re: Can use X10 230Vac/50Hz in 220Vac/50Hz ?

gil shultz

Re: Can use X10 230Vac/50Hz in 220Vac/50Hz ?