Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[320vu50]

From what I read an X10 motion detector can be used for camera activation and recording. The drawback with the Pan/Tilt/Zoom cameras is they have to be pointed at the detector's activity field. This is difficult when there are more than one detector in the coverage area of a camera. The specific hot spots for camera coverage are often preset in the camera for manual use. How about modifying the IWitness program so a camera AND a preset can be used for the video? This feature can be set (within the program) so it is only available for cameras with presets capability.

[Tuicemen]

Actually this should be able to be accomplished Now!
You'd need a macro for each motion sensor they would look like this

• Sensor address is the trigger
• Turn on cam
• Go to Camera Preset
• Start video record
• Delay
• Turn off video record
• Turn off cam
[/b][/color]

I have had a macro such as this  set for months!
Note: The sensor address has to be different then the cam address!