Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[jimw345]

Finally got showtime software loaded , hooked up and running. The signal is weak, with reciever 5 feet away, from transmitter, in open area, the picture is poor. Thirty feet away through one wall, pure garbage. As is the system is unusable, anyone have any suggestions?    Jim

[HA Dave]

................. the picture is poor. ........... through one wall, pure garbage.

I have the VGA audio/video sender/receiver... Although to be honest I do believe the results I get from regular video sender is slightly better... I would NOT call my VGA's senders results POOR.

The sender/receiver units do take a little tweaking. Much has been posted here regarding the sender/receivers... the same information applies to the VGA unit. If you can provide a more descriptive definition of your problem... we may be able to more quickly help you fine a solution.

[Brian H]

Also let us know if you have a 2.4 Ghz. coredless phone or wireless network. Both are known to cause interference. Checking that both are on the same channel would also be a thing to check.

[jimw345]

I have eliminated the phones and wireless by turning them off, with little if any change. Double checked all connections, everything according to instructions. I have a spare reciever, same results. It all points to weak transmission, I have not given up, just thought someone may have a suggestion.    Jim

[zach1234]

I am haveing the same problem too. I am planing on sending it back. I dont get it. My video Sender works but this dosent.

[HA Dave]

I have eliminated the ........ wireless by turning them off, ....................

Unplugging the wireless router as a test is good. But also remember anything that would normally talk with the router (a laptop, wireless desktop, or maybe even an Xbox) can be generating a data stream trying to communicate with the router.