Contact | X10.com
Please login or register.

Login with username, password and session length

Author Topic: can I use a PCW03 remotely with a WS12-A/WS14-A  (Read 2662 times)

dls6116

  • Newbie
  • Helpful Post Rating: 0
  • Posts: 1
can I use a PCW03 remotely with a WS12-A/WS14-A
« on: February 19, 2007, 05:53:57 PM »
When talking to sales I was told I could use a PCW03 to remotely control a circuit with a WS12-A/WS14-A set of switch's.  I would like to run power to the PCW03 in a different circuit then the WS12-A and have it send a signal over the house wiring to the WS12-A.  if this is really possible how do I set up the two switch's?
Logged

Brian H

  • Community Organizer
  • Hero Member
  • ***
  • Helpful Post Rating: 305
  • Posts: 13295
Re: can I use a PCW03 remotely with a WS12-A/WS14-A
« Reply #1 on: February 19, 2007, 06:59:32 PM »
No it is the X10Pro version of a companion switch [X10 WS14A]. Used in a three way light circuit. It does not transmit an X10 signal over the powerline and must be directly connected to the master switch.
Logged
 

X10.com | About X10 | X10 Security Systems | Cameras| Package Deals
© Copyright 2014-2016 X10.com All rights reserved.