Contact | X10.com
Please login or register.

Login with username, password and session length

Author Topic: macro activating a light switch but the light doesnt turn on  (Read 4096 times)

donutlou

  • Full Member
  • ***
  • Helpful Post Rating: 0
  • Posts: 38
macro activating a light switch but the light doesnt turn on
« on: June 07, 2007, 05:47:30 PM »
subject line says it all, i have a macro that activates a light and on the computer screen the switch flips but the actual light does not turn on, or off... anyone run into this problem???
thanks
Logged

Puck

  • Advanced Member
  • Hero Member
  • ******
  • Helpful Post Rating: 171
  • Posts: 1799
Re: macro activating a light switch but the light doesnt turn on
« Reply #1 on: June 07, 2007, 05:53:40 PM »
My first guess would be a signal integrity issue between the CM15A and the light switch.

You can verify this by turning the switch on & off manually with your mouse in AHP. If it works, then noise or signal loss shouldn't be the problem. If it doesn't then the signal is degraded by the time it reaches the switch.

Logged

donutlou

  • Full Member
  • ***
  • Helpful Post Rating: 0
  • Posts: 38
Re: macro activating a light switch but the light doesnt turn on
« Reply #2 on: June 07, 2007, 06:12:12 PM »
it turns on and off with the mouse.  ???
Logged

Tuicemen

  • Administrator
  • Hero Member
  • ****
  • Helpful Post Rating: 283
  • Posts: 10509
  • I don't work for X10, I use it successfuly!
Re: macro activating a light switch but the light doesnt turn on
« Reply #3 on: June 07, 2007, 06:30:19 PM »
What is the trigger for the macro?
Does the macro work if you click on it with the mouse?
Can you post a pic of the macro?
Logged
Please Read Topic:
General Forum Etiquette
Before you post!

donutlou

  • Full Member
  • ***
  • Helpful Post Rating: 0
  • Posts: 38
Re: macro activating a light switch but the light doesnt turn on
« Reply #4 on: June 07, 2007, 07:42:22 PM »
i use the big red button a12 to run a macro that turns on my bedroom lights if the bedroom module is off and turns off the lights if the bedroom module is on. really simple. it does work if i click on the macro with the mouse and it does flip the switch when i hit the button (remote) but the button even though it flips the switch on the screen it doesnt actually turn on the lights in my room. i have also been having an issue with very slow running macros that i tried solving with the forum before but to no avail. maybe computer problems?  how do i put pictures on here?
Logged

Tuicemen

  • Administrator
  • Hero Member
  • ****
  • Helpful Post Rating: 283
  • Posts: 10509
  • I don't work for X10, I use it successfuly!
Re: macro activating a light switch but the light doesnt turn on
« Reply #5 on: June 07, 2007, 07:54:38 PM »
Quote from: donutlou on June 07, 2007, 07:42:22 PM
  how do i put pictures on here?
see my post Topic: The Finer Art of Posting to the Forums  (Read 2420 times) for "the step by step how to" as well as other forum tips!
As for macros running slowly do you have any other transceivers in your setup besides the CM15A? This may also be causing the problem with your light macro! ;)
Logged
Please Read Topic:
General Forum Etiquette
Before you post!

donutlou

  • Full Member
  • ***
  • Helpful Post Rating: 0
  • Posts: 38
Re: macro activating a light switch but the light doesnt turn on
« Reply #6 on: June 08, 2007, 09:30:37 AM »
yeah i do, i have the cm15a only to transcieve the house codes that are not being used by the plug in transcievers though. do you think that could be the problem?  i would like to re-install the entire program, are there any posts that cover un-installing and re-installing from soup to nuts. without losing all my macros, of course :)
Logged
 

X10.com | About X10 | X10 Security Systems | Cameras| Package Deals
© Copyright 2014-2016 X10.com All rights reserved.