Problems with Anaconda Camera

[Rob_Rocks]

I've got an Anaconda camera that is missing the adaptor cable. So I built a new one. Does any one know if one is even available?. The problem I having is that I'm getting a 60Hz. hum through the audio on my TV from the camera audio. At least that what it sounds like. I know that the adaptor cord is wired correctly. I get good Video. Any suggestions would get me out of the Dog House.

[Dan Lawrence]

I've got an Anaconda camera that is missing the adaptor cable. So I built a new one. Does any one know if one is even available?. The problem I having is that I'm getting a 60Hz. hum through the audio on my TV from the camera audio. At least that what it sounds like. I know that the adaptor cord is wired correctly. I get good Video. Any suggestions would get me out of the Dog House.

Is the cable you made exactly like the one supplied with the Camera?  On the X10 site they don't list a replacement cable. 

[Rob_Rocks]

Hi Dan-
Yes, I made it as close as possible. X10 does offer one but you have to call them directly. The Model number is ZC 14A, cost 4.99 plus shipping. But as to my camera problem, I opened up the camera and found that the 12v lead was soldered poorly and was  >!shorting to the audio feed, causing the noise. Re soldered and I'm up and running again. And out of the dog house.!!
Thanks