Contact | X10.com
Please login or register.

Login with username, password and session length

Author Topic: CM11A Not Responding  (Read 3060 times)

nupe494

  • Newbie
  • Helpful Post Rating: 0
  • Posts: 3
CM11A Not Responding
« on: November 28, 2007, 12:22:30 PM »
Did a brief search on the board and found a few relative topics but I want to cover my bases before making any conclusions.

I'm using v1.42d of active home and have been unable to connect to my CM11A on any port (although Port 1 is the current COM port) on two PCs. I've also attempted to connect to it on a third PC running Linux and the Heyu s/w with no success. How reliable are the CM11a? Are they prone to just quitting? Any other suggestions as to what might be at fault? I've replaced batteries, changed comm ports, updated software to no avail. Also, I'm running WINXP.
Logged

Brian H

  • Community Organizer
  • Hero Member
  • ***
  • Helpful Post Rating: 305
  • Posts: 13295
Re: CM11A Not Responding
« Reply #1 on: November 28, 2007, 04:30:08 PM »
XP has been reported to be a problem for some. The Heyu with Linux; I have not seen any problem reports.
How old is the CM11A? It may have failed if you have tried it on many computers. How does the serial cable look? It to may have gone bad but again I have not seen any reports of cable problems.
Logged

Charles Sullivan

  • Hero Member
  • *****
  • Helpful Post Rating: 94
  • Posts: 1565
    • HEYU - X10 Automation for Linux, Unix, and Mac OSX
Re: CM11A Not Responding
« Reply #2 on: November 28, 2007, 08:29:58 PM »
Quote from: nupe494 on November 28, 2007, 12:22:30 PM
Did a brief search on the board and found a few relative topics but I want to cover my bases before making any conclusions.

I'm using v1.42d of active home and have been unable to connect to my CM11A on any port (although Port 1 is the current COM port) on two PCs. I've also attempted to connect to it on a third PC running Linux and the Heyu s/w with no success. How reliable are the CM11a? Are they prone to just quitting? Any other suggestions as to what might be at fault? I've replaced batteries, changed comm ports, updated software to no avail. Also, I'm running WINXP.

A big question is whether this CM11A has ever worked for you in the past or instead is newly acquired.

Logged
Yesterday it worked.
Today it doesn't work.
X10 on Windows is like that.

HEYU - X10 Automation for Linux, Unix, and Mac OS X     http://www.heyu.org

nupe494

  • Newbie
  • Helpful Post Rating: 0
  • Posts: 3
Re: CM11A Not Responding
« Reply #3 on: November 29, 2007, 08:56:22 AM »
This unit is about 3-4 years old and yes, it did work for me in the past. I had stopped using it for whatever reason and stored it away. Pulled it back out for use in controlling the Christmas lights and no joy.

The cable and connector appear to be in good shape. I wish there was a way to determine beyond a reasonable doubt that the unit is no good.

Logged
 

X10.com | About X10 | X10 Security Systems | Cameras| Package Deals
© Copyright 2014-2016 X10.com All rights reserved.