Please login or register.

Login with username, password and session length

Author Topic: Cannot get channel 6 to work  (Read 2578 times)

idbl_fanatic

  • Hero Member
  • *****
  • Helpful Post Rating: 1
  • Posts: 188
Cannot get channel 6 to work
« on: March 18, 2008, 12:58:00 AM »

OK, so heres the deal, I have a socket rocket on Channel 6 that will work with my remote, and with my controller, however, it will not work with AHP, well I take that back ,it will work sometimes, like tonight, I was able to turn it off and on 2 times, but that was it, and it will also work every now and then correctly on the timer that I have set.

It is only channel 6 that does this this, all other channels work fine, 1, 2, 3, 4, and 5. I havent tried like 7, because I have having a HECK of a time getting these darn socket rockets to reprogram.

any suggestions?

Thanks
Logged

idbl_fanatic

  • Hero Member
  • *****
  • Helpful Post Rating: 1
  • Posts: 188
Re: Cannot get channel 6 to work
« Reply #1 on: March 18, 2008, 01:12:43 AM »

Just thought about something...............my refrigerator is plugged into the same outlet that the socket rocket on channel 6 is on..........could this be causing it? if so, how can I get around it? It NEEDS to be plugged in there. There is no other option.

Would something like this help? http://cgi.ebay.com/BoosterLinc-Plug-in-X10-Signal-Booster-Amplifier-4827_W0QQitemZ140215339569QQihZ004QQcategoryZ50587QQtcZphotoQQcmdZViewItemQQ_trksidZp1713.m153.l1262

« Last Edit: March 18, 2008, 01:24:02 AM by idbl_fanatic »
Logged

steven r

  • Advanced Member
  • Hero Member
  • ******
  • Helpful Post Rating: 74
  • Posts: 2189
  • Halloween with X10
Re: Cannot get channel 6 to work
« Reply #2 on: March 18, 2008, 04:23:59 AM »

...or a filter like this http://www.smarthome.com/1626-10.html.

BTW.. I've see the booster that you linked to on eBay go for half that at the Smarthome auctions in the past.
Logged
BVC let's me tell my camera where to go!
:) Murphy is my beta testing pal. He helps me find problems whether I like it or not. :)

idbl_fanatic

  • Hero Member
  • *****
  • Helpful Post Rating: 1
  • Posts: 188
Re: Cannot get channel 6 to work
« Reply #3 on: March 21, 2008, 04:40:34 PM »

Well, I FINALLY got around to installing my phase coupler, and now these seem to work..........I dunno, cause they ALWAYS worked from the remote, so I dont get it
Logged
 

X10.com | About X10 | X10 Security Systems | Cameras| Package Deals
© Copyright 2014-2016 X10.com All rights reserved.