AHP Software Registration going nowhere...

[trawlergeek]

Yep. CP290.  I still have the programming instructions somewhere around here that came with that unit.

Dan, thanks very much for the advice and encouragement.

Until next time,
Cheers!

Jim

Hopefully, AHP will work fine from here on.

X10 has a boatload of good people and programmers jump ship and some of those are users who still frequent this forum.

I've had it since 2005 and it's been fine.

My system has various modules and a single keypress macro.

I started with X10 in the middle 1980's with a CP290 and X10's DOS software.

[Tuicemen]

trawlergeek Glad you have it working now and thanks for reporting exactly what needed to be done. I'm sure it will be found helpful by someone!
I should have remembered I had to have a serial reset in the server too But can't remember for what think it was vanguard!  (My mind isn't what it once was!)
As Dan stated

X10 has a boatload of good people and programmers jump ship and some of those are users who still frequent this forum.

Depending on how big your set up is or expands too you may find you need to do a little tweeking But the Answers can usually be found on here!