Can this be used in the UK, with UK X10 devices??

Started by paul, October 02, 2005, 02:33:45 PM

Previous topic - Next topic

paul

Can this be used in the UK, with UK X10
devices??

roger1818

Paul: The short answer is no.  The CM15A is
dependant on having 60Hz power.  The 50Hz
power you have in the UK will cause the
clock to run slow.  The transceiver also
works at a different RF frequency for North
America than it does in Europe.

Tuicemen

#2
Although this is an old thread I thought it should be noted that there now is a European version out
The CM15-E can be purchaced here(page in french)
A link to the AHP-EU software can be found on my site at the bottom of the page! ;)
Please Read Topic:
General Forum Etiquette
Before you post!

tom j

HAY what's this a longer antenna. Hum......   >:(

Tom j.

Tuicemen

No doubt!
They definitely reworked more then just the power issues.
Even the software has a higher release version. Guess we know where all the X10 USA programmers and engineers went! ;) :D ;D
Please Read Topic:
General Forum Etiquette
Before you post!

tom j

Say Tuiceman guess they figured the Europeans weren't going to accept a 4 foot range  you think ?  ::)

Tom j

Tuicemen

Since they use different frequencies for RF over there that may be the reasoning! ::) Also there are a few like me that get the advertised range (with out any mods) , and no my house isn't made of paper mache! ;)
Please Read Topic:
General Forum Etiquette
Before you post!

SMF spam blocked by CleanTalk