Could the Wireless Motion Detector (MS10A) be used outside the house?

Started by JSquare, May 09, 2008, 09:15:47 PM

Previous topic - Next topic

JSquare

I just got the DS7000 kit and also purchased 4 door/window sensors, but I want know if the motion detector could be used to monitor the front entrance to the house or maybe the backyard?

Puck

JSquare: Welcome to the forum. I have never opened one up, but from looking at it, I really doubt it is weather proof. I don't recall a water seal on the battery compartment.

Would you really want your security system to go off if a cat walks by or someone simply comes to your front door?

Tuicemen

I use one outside to monitor the front entrance, but it is located under the overhang on the front porch! ;)
As Puck stated the battery compartment doesn't have a water seal!
Please Read Topic:
General Forum Etiquette
Before you post!

JSquare

Quote from: Tuicemen on May 11, 2008, 04:51:54 PM
I use one outside to monitor the front entrance, but it is located under the overhang on the front porch! ;)
As Puck stated the battery compartment doesn't have a water seal!
That's the same location I was planning on installing, but as Puck also mentioned I don't want  the system to go off every time someone walks by, so I decided to go for the chime module instead.

Tuicemen

JSquare Good point but mine is facing the front door not the street the only false alarms I get are from cats! ;)
I also don't use it with the D7000 but use it with AHP and OnAlert so it triggers a wav file to play,no siren!
Please Read Topic:
General Forum Etiquette
Before you post!

SMF spam blocked by CleanTalk