Contact | X10.com
Please login or register.

Login with username, password and session length

Author Topic: Use of regular X10 switch or X10Socket with Flourescent bulbs.  (Read 32731 times)

galdino cedeno

  • Newbie
  • Helpful Post Rating: 0
  • Posts: 1
Use of regular X10 switch or X10Socket with Flourescent bulbs.
« on: January 16, 2006, 01:43:59 PM »
What is the expected failure if I use some
lamp module, wall switch or socket rocket
with fluorescent. Will the lamp be damaged?,
will be the module damaged? or will I waste
energy?
Logged

Kelly Parke | Program Manager

  • Hero Member
  • *****
  • Helpful Post Rating: 0
  • Posts: 153
Re: Use of regular X10 switch or X10Socket with Flourescent bulbs.
« Reply #1 on: January 31, 2006, 03:23:26 PM »
With the exception of the WS13A, all of our
lamp modules, wall switches, and socket
rockets are designed for use with
incandescent bulbs. Using any other type of
load will cause the switches to not work
properly or consistently. Using a
fluorescent bulb with any of the above, will
not necessarily cause damage, but you will
get inconsistent results.
Logged
Kelly Parke
X10 Contractor Program Manager

bob hamilton

  • Jr. Member
  • **
  • Helpful Post Rating: 0
  • Posts: 15
Re: Use of regular X10 switch or X10Socket with Flourescent bulbs.
« Reply #2 on: January 31, 2006, 11:09:06 PM »
wHAT KIND OF FLORESCENT LIGHT FIXTURE ARE
YOU USING. SOME LARGER FIXTURES USE 277
VOLT BALLASTS AND ARE WIRED DIFFERENTLY
THEN ONE OF THOSE LESS EXPESIVE SMALLER
MODELS. yOU MIGHT WANT TO CHECK THAT OUT.
DONNO ...JUST A THOUGHT .
Logged

orca

  • Full Member
  • ***
  • Helpful Post Rating: 1
  • Posts: 25
Re: Use of regular X10 switch or X10Socket with Flourescent bulbs.
« Reply #3 on: November 23, 2008, 04:38:04 PM »
Hello

Check out X10Pro for a switch to use with flourescents and also Leviton specifically
has an X10 switch for flourescent bulbs too.

I have had success using both switches with flourescents.
Logged

joako

  • Jr. Member
  • **
  • Helpful Post Rating: 0
  • Posts: 24
Re: Use of regular X10 switch or X10Socket with Flourescent bulbs.
« Reply #4 on: November 24, 2009, 01:46:18 PM »
What about XPFM?
Logged

Brian H

  • Community Organizer
  • Hero Member
  • ***
  • Helpful Post Rating: 305
  • Posts: 13295
Re: Use of regular X10 switch or X10Socket with Flourescent bulbs.
« Reply #5 on: November 24, 2009, 03:46:32 PM »
X10Pro XPFM is a fixture module and is a mechanical switch type.
It should work with a Fluorescent Light.
Usually mounted in the light fixture.
Logged
 

X10.com | About X10 | X10 Security Systems | Cameras| Package Deals
© Copyright 2014-2016 X10.com All rights reserved.