Topic: Wall module turns off but not on (Read 3282 times)

djlamm · « **on:** October 04, 2008, 08:59:36 PM »

Hi there,
I'm new to this forum. All my modules work properly, but I have 2 wall modules next to each other that will only turn off but not on. I've tried changing codes, etc.

Any ideas?
Thanks, David

Puck · « **Reply #1 on:** October 04, 2008, 09:33:38 PM »

djlamm: Welcome to the forum. Please state the model types of the 2 wall modules. If they are dimmers that do not use a neutral wire, you could have the line & load wires reversed.

djlamm · « **Reply #2 on:** October 04, 2008, 10:09:35 PM »

Hi thanks for the reply. The modules are WS12A and they are in the same electrical box with 2 addresses. There is no neutral that goes to them. There are, however, 2 positive lines and 1 neutral coming into the box. I have a third standard light switch connected to the other line.

What do you think?

Knightrider · « **Reply #3 on:** October 04, 2008, 11:01:45 PM »

As Puck pointed out earlier, did you check for the proper configuration of the black and blue wires (AKA "Feed" and "Fart")?

Boiler · « **Reply #4 on:** October 05, 2008, 09:31:19 AM »

djlamm,

Sounds as if your WS12a units have the newer "soft start" features. Please try re-identifying these units as "LM14a 2-way Lamp Modules" and let us know how things are working.

Boiler

djlamm · « **Reply #5 on:** October 05, 2008, 10:00:17 AM »

Hey Boiler,

Thanks! That worked great. The icons in the program don't show the correct status, but the timers work properly. I appreciate it.

News:

Author Topic: Wall module turns off but not on (Read 3282 times)

djlamm

Wall module turns off but not on

Puck

Re: Wall module turns off but not on

djlamm

Re: Wall module turns off but not on

Knightrider

Re: Wall module turns off but not on

Boiler

Re: Wall module turns off but not on

djlamm

Re: Wall module turns off but not on