Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[vettukili]

Hello

The door frame is curved. How do I install the door sensor? I'm guessing use some kind of padding material and glue it to the door frame ? Any advice ?

thnx

[HA Dave]

...The door frame is curved. How do I install the door sensor? Any advice ?

The trim around some of my doors and windows also "gets in the way" of my magnetic reed switches. The local [national chain store] building supply store sells both wood and vinyl trim "by the foot". The white vinyl trim they sell is a nice match to the white plastic magnetic reed switches. It's very easy to cut and shape to fit odd areas.. and to make spacers.

[MANOWAR©]

I've always used these kind on my Ademco alarm system.

http://www.basshome.com/product_3386_detailed.htm

You drill a 3/4" hole and recess them into the frame and the door. You could cut the wires on the X10 sensor and wire this one up and fish the wire in wall.

[Charles Sullivan]

Hello

The door frame is curved. How do I install the door sensor? I'm guessing use some kind of padding material and glue it to the door frame ? Any advice ?

thnx

One approach (which is however not esthetically pleasing) is to crack open the magnet assembly (the part without the wires) and remove the magnet.  Cut a short groove in the door frame molding and putty in (and paint over) the magnet, then mount the switch and transmitter on the door itself.