help

[alexo1us]

FinallyGot some hardware to need help
first anything special with the slimeline switch can't it to set the first button using instructions
second Socket rockets can they be set from a CM15A?
THANKS
Alex
ps still no registraton codes

[originalevil]

I haven't gotten around to using the socket rocket or slimline switch, so maybe someone else here can help you with that.

For the registration code, call 1-800-442-5138, press 2 for technical support, and give them your order number. They'll give you the code. I just got off the phone asking them to email me the codes and link again 5 minutes ago because I'm wiping my AHP computer and installing XP Media Center instead of Vista.

[Jsnlong]

To set the unit code on the first button you have to .......

(the off button is the right side of the rocker button)
Press and hold the top OFF  button . The red LED blinks once. 3 seconds later, the LED blinks the current setting: 1 blink for Unit Code 1, 2 blinks for 2, 16 blinks for 16.
Release the top OFF button key.
Press and release the top OFF button key the appropriate number of times for the Unit Code you want. IMPORTANT: Hold the key on your last press. 3 seconds later the new code blinks back. If you do not follow this programming sequence, the LED will stay on for 1 second and your existing setting will not be changed ( so for unit code 3 you should press the button 3 times and hold it down on the 3rd time)


The house code is done the same but you use the on button ( left side of rocker button)

[originalevil]

Man, I don't think I'm going to get aroudn to using the slimline switch! Wow!

[alexo1us]

Thanx Jsnlong
I know now where i was going wrong I was't holding the key after trying to set it to A4.
Alex
my slimline switch is working now