Contact | X10.com
Please login or register.

Login with username, password and session length

Author Topic: Difference between "select camera" and "camera on"  (Read 18455 times)

jeepr

  • Newbie
  • Helpful Post Rating: 0
  • Posts: 9
Difference between "select camera" and "camera on"
« on: January 30, 2009, 09:59:40 AM »
So, I've created some macros, but I'm wondering what is the difference between "camera on" and "select camera"?  If they are set up in a camera group, it will automatically turn the selected one on and the others off.  Currently I'm using camera on, and then when I get an off command from the sensor, I stop still recording and turn the camera off.  Is there really any need to ever turn them off?  Does it hurt for the last active camera to be left on for an unknown amount of time?
Logged

Tuicemen

  • Administrator
  • Hero Member
  • ****
  • Helpful Post Rating: 286
  • Posts: 10545
  • I don't work for X10, I use it successfuly!
Re: Difference between "select camera" and "camera on"
« Reply #1 on: January 30, 2009, 12:51:22 PM »
it is a good idea to turn them off!
I have a very old wired x10 cam that suffers from image burn in!
I'm not sure how long it took for this to happen but it now has a ghost image that appears when I pan it to a new location! :(
 >!
Logged
Please Read Topic:
General Forum Etiquette
Before you post!

Alan V

  • Hero Member
  • *****
  • Helpful Post Rating: 8
  • Posts: 171
Re: Difference between "select camera" and "camera on"
« Reply #2 on: January 30, 2009, 01:21:48 PM »
Quote from: Tuicemen on January 30, 2009, 12:51:22 PM
I have a very old wired x10 cam that suffers from image burn in!
 >!

Must be very old.  Phosphorus cameras did suffer from burn-in;  the new CMOS types should not.
Logged

Tuicemen

  • Administrator
  • Hero Member
  • ****
  • Helpful Post Rating: 286
  • Posts: 10545
  • I don't work for X10, I use it successfuly!
Re: Difference between "select camera" and "camera on"
« Reply #3 on: January 30, 2009, 02:33:21 PM »
Alan V
Yep one of the first few sold! ;)

Quote
Phosphorus cameras did suffer from burn-in;  the new CMOS types should not.
True but best to play it safe, also if your using cams with IR the lights will last longer!
Logged
Please Read Topic:
General Forum Etiquette
Before you post!

steven r

  • Advanced Member
  • Hero Member
  • ******
  • Helpful Post Rating: 74
  • Posts: 2189
  • Halloween with X10
Re: Difference between "select camera" and "camera on"
« Reply #4 on: January 30, 2009, 03:23:51 PM »
For what it's worth...
While you can turn off the wireless signal, you can't turn off the wired signal from a Sentinel camera unless you cut power to it.
Logged
BVC let's me tell my camera where to go!
:) Murphy is my beta testing pal. He helps me find problems whether I like it or not. :)

Alan V

  • Hero Member
  • *****
  • Helpful Post Rating: 8
  • Posts: 171
Re: Difference between "select camera" and "camera on"
« Reply #5 on: January 30, 2009, 04:32:59 PM »
Quote from: Tuicemen on January 30, 2009, 02:33:21 PM
True but best to play it safe, also if your using cams with IR the lights will last longer!

I agree with you that it is always wise to save power.  And any electronic device will last longer with a lower duty cycle.  It's very hard for an electronic device to fail when it's turned off.  ;)

But IR LEDs should last between 50,000 and 100,000 hrs. (that's 5.7 to 11.4 years) even if left on constantly.  :-X
Logged

Tuicemen

  • Administrator
  • Hero Member
  • ****
  • Helpful Post Rating: 286
  • Posts: 10545
  • I don't work for X10, I use it successfuly!
Re: Difference between "select camera" and "camera on"
« Reply #6 on: January 30, 2009, 07:08:14 PM »
Quote from: Alan V on January 30, 2009, 04:32:59 PM
But IR LEDs should last between 50,000 and 100,000 hrs. (that's 5.7 to 11.4 years) even if left on constantly.  :-X
Should is the majic word, one of my Astak cams is down to 3 or 4 lights working from 12 :'(
Logged
Please Read Topic:
General Forum Etiquette
Before you post!

Alan V

  • Hero Member
  • *****
  • Helpful Post Rating: 8
  • Posts: 171
Re: Difference between "select camera" and "camera on"
« Reply #7 on: January 30, 2009, 08:00:33 PM »
It may be the LEDs like you say, but it could even be something else, i.e. failed solder joints (from temperature cycling).  I've seen failures like that before.
Logged

KJM

  • Newbie
  • Helpful Post Rating: 0
  • Posts: 5
Re: Difference between "select camera" and "camera on"
« Reply #8 on: February 04, 2009, 07:14:26 PM »
HI. Jeepr


  How do you select camera on?



   KJM
Logged
 

X10.com | About X10 | X10 Security Systems | Cameras| Package Deals
© Copyright 2014-2016 X10.com All rights reserved.