Contact | X10.com
Please login or register.

Login with username, password and session length

Author Topic: GFCI outlet  (Read 3246 times)

birdzeye

  • Hero Member
  • *****
  • Helpful Post Rating: 3
  • Posts: 475
GFCI outlet
« on: January 19, 2009, 04:45:22 PM »
Hi,
I've noticed that one camera I have that's plugged directly into a GFCI outlet always consistently works really well, and turns on and off immediately when triggered. Does a GFCI outlet improve signal transmissions?
Logged

steven r

  • Advanced Member
  • Hero Member
  • ******
  • Helpful Post Rating: 74
  • Posts: 2189
  • Halloween with X10
Re: GFCI outlet
« Reply #1 on: January 19, 2009, 05:18:06 PM »
No.
Some have complained that they have had a diminished signal when plugged into a GFI outlet. I've never noticed a difference myself.
Logged
BVC let's me tell my camera where to go!
:) Murphy is my beta testing pal. He helps me find problems whether I like it or not. :)

Alan V

  • Hero Member
  • *****
  • Helpful Post Rating: 8
  • Posts: 171
Re: GFCI outlet
« Reply #2 on: January 19, 2009, 06:00:28 PM »
The hot and neutral leads on a GFCI are surrounded by a differential transformer.  The differential transformer is used to detect current imbalances of ~5mA.  When such an imbalance exists it usually means that there is a leakage current flowing through GND.  This in turn trips the GFCI which shuts off current.  There is no active circuitry in series with either the hot or neutral leads.  The transformer surrounding the leads may act like an inductor to slightly impede the 120kHz X10 data, but I would think the effect would be negligible.
Logged

Brian H

  • Community Organizer
  • Hero Member
  • ***
  • Helpful Post Rating: 305
  • Posts: 13295
Re: GFCI outlet
« Reply #3 on: January 19, 2009, 06:28:59 PM »
Maybe you got lucky and the differential transformer mentioned. Actually is reducing a noise source you have on the power line.
Logged

originalevil

  • Full Member
  • ***
  • Helpful Post Rating: 1
  • Posts: 52
  • We could do some watercolors together. You and I.
Re: GFCI outlet
« Reply #4 on: January 19, 2009, 11:43:55 PM »
Whatever you do, don't put a power horn on a GFCI outlet! I had one out in my garage on a GFCI and set my alarm off by mistake. i didn't think anything of it until the following weekend, when I noticed a bad smell.

The powerhorn had tripped the GFCI circuit, which killed power to everything in my garage.... including a chest freezer full of frozen food!
Logged
 

X10.com | About X10 | X10 Security Systems | Cameras| Package Deals
© Copyright 2014-2016 X10.com All rights reserved.