Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[mritorto]

guys,

My question can you have the EagleEye sensor turn on lights only when its dark but also turn them off at certain intervals when its dark.

I am guessing if you use the dusk & dawn feature it only turns it off when the sun is up but not both

[mritorto]

guys,

Please note that I would like it turn off the lights when its dark when motion is not detected

[hawk1]

Do you have AHP with Smart Macro's?  Then yes.  Setup a macro with the motion sensor as the trigger, then setup a timer to only come on at night.  You can either have the motion sensor turn the light off or the macro.  hope this helps

[dave w]

guys,

My question can you have the EagleEye sensor turn on lights only when its dark but also turn them off at certain intervals when its dark.

I am guessing if you use the dusk & dawn feature it only turns it off when the sun is up but not both

Here is link to the EagleEye instructions. http://software.x10.com/pub/manuals/ms13a-ms14a-is.pdf

The Eagle Eye sends a "Unit Code" ON command when it sees motion and a Unit Code OFF command after a preset time period of no movement.
The dusk - dawn function sends unit code +1 ON when dark, and unit code + 1 OFF when light. You can use the Dusk-Dawn feature to turn other lights ON at dusk and OFF at dawn. That is all.
To get other actions you need the CM15A and AHP like hawk1 suggested.