Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[maxmcd]

I can't get the CR12A remote to turn on/off the XM13A power supplies on my four cameras to switch the video.  Power supplies are set to A1, A2, A3, and A4. Remote is set to A and I have the slide switch in 1-8 mode.  Having only A1 plugged in, in the same room as the remote and monitor, the remote will not actuate the power supply.  Batteries in the remote are fresh.  Any ideas?

[Puck]

maxmcd: Welcome to the forum.

What are you using as a Transceiver?

[maxmcd]

Thanks for the welcome and quick response.  TM751, and yes i didn't have it plugged in.  duh.  I got the system back in 02 and had it running one camera through a small tv, and i thought I'd try to get it working with 4 cameras like it was supposed to.  Had it switching, the reception on the cameras were fuzzy, so i played with the receiver vr31a plugged the video out into a usb to rca adapter and then the power supply for the receiver took a crap.  So now I'm looking through the website to see if they now make a usb direct audio video receiver and a usb firecracker as my notebook pc doesn't have a serial port.

Thanks again for the quick response.

[Tuicemen]

maxmcd
X10 does indeed make both
Cm19a is the usb fire cracker But you may wish to look at the Cm15A and the Activehomepro All Plug-in package deal it will allow for future expansion!
The USB 2 Video capture device is the VA12A (no sound)
You could try E-bay for a usb audio video capture device! I know they have them but if they'll work with your software is another question!