Dial Out Testing

Started by Kramer Chins, March 04, 2009, 05:56:05 PM

Previous topic - Next topic

Kramer Chins

Is there anyway to test if the DS7000 will dial out without "Arming" the system and then setting it off?
Registered Members of MCBA... WWW.KRAMERCHINS.COM

Trying to learn X10 Day by Day...........

jpeckiii

Kramer,
This is the only method I know about to test the dial-out. You either have to trigger an alarm, or you have to set off a panic, but only if the system is armed FIRST will it dial out on a panic. If you press panic without arming the system first it will not dial out. I thought my dialer was not working because I tested it like described above. You can always unplug all external sounders from the wall and place a pillow or towel over the unit if you are concerned about disturbing neighbors etc.

,James

Kramer Chins

 >! Thanks James......

Yeah I already use the pillow method when playing around with the system. ( :'.. I just put a picture of my Mother in Law on the console, this makes using the pillow a lot easier.....  rofl :)% rofl )
Registered Members of MCBA... WWW.KRAMERCHINS.COM

Trying to learn X10 Day by Day...........

SMF spam blocked by CleanTalk