wireless X10 Camera and X10 audio - video sender

[paulsaun3]

Will I have interference if both of these units are active at the same time?  It appears they are are on the same frequency.

[Brian H]

Probably you will. Have you tried varied channels for each unit? Like maybe camera on A and video sender on D.

[paulsaun3]

I'm considering purchasing one of each of them.  If the separate channels have worked for others, I'll give them a try.  I assume the three camera setup uses a channel for each camera?
Brian, thanks for the comment.

[hawk1]

Hope I'm not butting in but I'll try to explain.  The 3 cameras will be on the same frequency code. (A, B, C, D) And will have their own House and Unit code. (C1, C2, C3)

Then you could try a different Frequency code for the Video/Audio sender. (A, B, C, D)

Here is an example: camera 1 is C1, camera 2 is C2, camera 3 is C3.  All the camera frequency codes set to "A".

The Video/Audio sender would then have to be on a different frequency code of "B" or "C" or "D"

Hope this helps.

[paulsaun3]

Thanks,
That helps a lot, ordering today.

[Brian H]

As hawk 1 pointed out. The House Code A-P used to turn the cameras on and off is not the same as the transmitting channels A-D.

[Kramer Chins]

The set up hawk 1 gave you does work!!!

This is how I have mine set up ( with 9 cameras) , and it works great