Contact | X10.com
Please login or register.

Login with username, password and session length

Author Topic: I so confused  (Read 4051 times)

NetStorm

  • Jr. Member
  • **
  • Helpful Post Rating: 0
  • Posts: 20
I so confused
« on: April 27, 2009, 08:43:58 PM »
OK so I have read about people having similar issues but since none match I will post anywho
Using AHP, I have transceiverswith codes A and B  around the house, the lamp modules work fine on a schedule, but seems like none of my light switch modules will work, on a schedule.  B:( They will work with eagle eyes, and with a remote, some I can turn on from the computer, some I can't. Is there a limit on the number of light bulbs they can control on a schedule? (IE I have a hanging lamp control ed by a light switch that has 6 lightbulbs in it. )Since a sensor or a remote will turn them on, you would think it wouldn't matter. I have checked the repeat option in the schedule setup, so the command gets resent..I have 3 socket rockets on the same code that work fine on the same schedule, yet their light switch neighbor will not do a thing. The other question I have, is why do all my lights come on (the ones on schedules) after the electricity has been cut and then turned back on...and the funny thing is the light switches that don't work on a schedule, will come on after electricity has been restored
Thanks for any suggestions
Logged

dave w

  • Community Organizer
  • Hero Member
  • ***
  • Helpful Post Rating: 139
  • Posts: 6116
Re: I so confused
« Reply #1 on: April 28, 2009, 12:56:19 PM »
If your light switches are less than 18 months old try defining your light switches as LM14A in AHP.
Logged
"This aftershave makes me look fat"

Dan Lawrence

  • Hero Member
  • *****
  • Helpful Post Rating: 68
  • Posts: 3991
Re: I so confused
« Reply #2 on: April 28, 2009, 07:10:50 PM »
You need to give more information, the version of AHP, the O/S on the PC and if the CM15A is attached to the PC or separate from it.  Also are the any phase problems in your house?
Logged
I don't SELL this stuff... BUT I sure do ENJOY using it!!!

NetStorm

  • Jr. Member
  • **
  • Helpful Post Rating: 0
  • Posts: 20
Re: I so confused
« Reply #3 on: April 28, 2009, 11:39:38 PM »
Quote from: Dan Lawrence on April 28, 2009, 07:10:50 PM
You need to give more information, the version of AHP, the O/S on the PC and if the CM15A is attached to the PC or separate from it.  Also are the any phase problems in your house?
Most recent version of AHP ( purchased one month ago), OS is Windows XP , CM15A is attached to computer.No phase problems that I am aware of.

Logged

NetStorm

  • Jr. Member
  • **
  • Helpful Post Rating: 0
  • Posts: 20
Re: I so confused
« Reply #4 on: April 28, 2009, 11:40:30 PM »
Quote from: dave w on April 28, 2009, 12:56:19 PM
If your light switches are less than 18 months old try defining your light switches as LM14A in AHP.
Thx IŽll try that.
Logged

dave w

  • Community Organizer
  • Hero Member
  • ***
  • Helpful Post Rating: 139
  • Posts: 6116
Re: I so confused
« Reply #5 on: April 29, 2009, 12:40:13 PM »
Quote from: NetStorm on April 28, 2009, 11:40:30 PM
Quote from: dave w on April 28, 2009, 12:56:19 PM
If your light switches are less than 18 months old try defining your light switches as LM14A in AHP.
Thx IŽll try that.

Tell me if it works.
Logged
"This aftershave makes me look fat"

Dan Lawrence

  • Hero Member
  • *****
  • Helpful Post Rating: 68
  • Posts: 3991
Re: I so confused
« Reply #6 on: April 29, 2009, 04:42:21 PM »
Quote from: NetStorm on April 28, 2009, 11:39:38 PM
Quote from: Dan Lawrence on April 28, 2009, 07:10:50 PM
You need to give more information, the version of AHP, the O/S on the PC and if the CM15A is attached to the PC or separate from it.  Also are the any phase problems in your house?
Most recent version of AHP ( purchased one month ago), OS is Windows XP , CM15A is attached to computer.No phase problems that I am aware of.



I presume your AHP version is either 3.228 or 3.236. Be aware 3.236 is a buggy release it may or may not work properly.  If 3.236 is giving you problems, you may want to backdate to 3.228.  Go to http://software.x10.com/pub/applications/activehome/  and get 3.204 from there. Install it over 3.236. Once it is installed, you can update to 3.228 through the update link in AHP. 

If you have 3.228 you are good to go.
Logged
I don't SELL this stuff... BUT I sure do ENJOY using it!!!

NetStorm

  • Jr. Member
  • **
  • Helpful Post Rating: 0
  • Posts: 20
Re: I so confused
« Reply #7 on: May 01, 2009, 10:16:35 PM »



[/quote]

I presume your AHP version is either 3.228 or 3.236. Be aware 3.236 is a buggy release it may or may not work properly.  If 3.236 is giving you problems, you may want to backdate to 3.228.  Go to http://software.x10.com/pub/applications/activehome/  and get 3.204 from there. Install it over 3.236. Once it is installed, you can update to 3.228 through the update link in AHP. 

If you have 3.228 you are good to go.
[/quote]
Ok, IŽll give it a shot. Hopefully it will sove the problems. Thx for the info
Logged

NetStorm

  • Jr. Member
  • **
  • Helpful Post Rating: 0
  • Posts: 20
Re: I so confused
« Reply #8 on: May 01, 2009, 10:17:45 PM »

[/quote]
Tell me if it works.
[/quote]
Nope, sorry it didnŽt.
Thx though
Logged

NetStorm

  • Jr. Member
  • **
  • Helpful Post Rating: 0
  • Posts: 20
Re: I so confused
« Reply #9 on: May 01, 2009, 10:23:44 PM »
Something I DO NOT understand. If AHP, is capabńe, of connecting to the Internet (Zone Alarm told me when it requested it) AND updatye itself, WHY in the world, can I NOT register my software  B:(
Logged

NetStorm

  • Jr. Member
  • **
  • Helpful Post Rating: 0
  • Posts: 20
Re: I so confused
« Reply #10 on: May 01, 2009, 10:35:49 PM »
One more thing, can someone tell me what "Extended Code 3 3b" means? It shows up on the light switch modules, that are not responding to the schedule.
Is it because I checked the repeat option?
Logged
 

X10.com | About X10 | X10 Security Systems | Cameras| Package Deals
© Copyright 2014-2016 X10.com All rights reserved.