Using wall switch (XPS3) to control appliance module?

[adesimone]

I was wondering if it was possible to control an appliance module (pam01/am486) with a wall switch - I have an xps3 (pro appliance wall switch) that is used to control an outlet and I would like to turn on/off an appliance module when the switch is turned on/off.  Basically I have one lamp connected to the switched outlet (with a CFL) and I would like to turn on another lamp at the same time (with a CFL).  Is this possible?

thanks

[Brian H]

The XPS3 does not have a power line transmitter in it. So no it can not directly turn another module on or off.

There are some very clever folks here and they may have a way for you to do what  you desire.

[trol1374]

  How about one of the wall plug recepticles made by x10?  Change out the plug to that, then you can control the plug itself.

[dave w]

Basically I have one lamp connected to the switched outlet (with a CFL) and I would like to turn on another lamp at the same time (with a CFL).  Is this possible?

thanks

Not with the XPS3, however Smarthome.com has Insteon/X10 wall switches which control the load AND send out X10 codes then the wall switch is toggled.