Contact | X10.com
Please login or register.

Login with username, password and session length

Author Topic: Macro Report  (Read 2144 times)

dwalk

  • Newbie
  • Helpful Post Rating: 0
  • Posts: 2
Macro Report
« on: October 24, 2009, 08:06:36 AM »
I have 4  macros, each one is triggered by a motion sensor that turns on a light and a camera then delays 1 minute and turns off the light. In the macro report, 3 of the macros have green shading for the on action and red shading for the off, but in the 4th macro both the on and off actions are shaded in white. What if anything does this mean?
Logged
Just because you can doesn't mean you have to.....it's more like, just because I have to doesn't mean I can... but I still keep on trying!

dwalk

  • Newbie
  • Helpful Post Rating: 0
  • Posts: 2
Re: Macro Report
« Reply #1 on: November 02, 2009, 05:19:02 AM »
 It took me a while but I finally figured it out. The white background denotes lamp modules and displays percentage of illumination. All hard start modules display green for on and red for off. As I had all lamps set to 100% it only displayed "on" as did the remaining macros which led to my confusion(imagine that).
Logged
Just because you can doesn't mean you have to.....it's more like, just because I have to doesn't mean I can... but I still keep on trying!
 

X10.com | About X10 | X10 Security Systems | Cameras| Package Deals
© Copyright 2014-2016 X10.com All rights reserved.