Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[pattypoohhere]

I got the video sender and receiver. after a little frustration I got it to work and am happy except for the remote codes. I swear it has every code but the one i need and I tried doing it by the search method and got no place. I need a code for "viewsat platinum lite". Does anyone have A CODE or an idea of where i might find one? thank you
'

[HA Dave]

I take it... you got a remote control with you Video sender/receiver... what is the model number of the remote?

[AnJam]

Hello;

I am also having trouble with my video receiver VR20A not responding to the remote. It worked with an X-10 Model UR24A when I was using DISHNet, but after changing to ATT U-Verse, I receive a good signal, but can make changes *only* by going to the room with the ATT equipment (and an X10 VT46A sender) and using the U-Verse remote.

The X10 Platinum Model UR73A remote that came with the newest video sender and receiver has never worked with any of my X10 equipment.

I have the X10 VR46A receiver in another room, as well and it works fine with the same VT46A on the ATT box. Neither receiver responds to any X10 remote I own. (I also have an X10 UR19 device.)

In brief:
1. an X10 VT46A sender is attached to ATT's Motorola Model VIP1216 HD IP Video Set-top with DVR;
2. an X10 VR46A receiver in second room receives well but does not respond to any X10 remote;
3. an X10 VR20A receiver in a third room receives well but does not respond to any X10 remote;
4. an X10 VR20A sender in a fourth room seems not to transmit at all and does not respond to any X10 remote. (It is not in use at all at this time.)

Thanks for any suggestions.

[dave w]

FWIW - may not be accurate.

Did you try it using the U-Verse remote in your other rooms? I believe the problem is with your UR24A or UR73A and not the Video Sender/Receiver units.

ATT U-Verse has been a problem for other X10 remotes because it sends commands in two bursts, which as of this summer, X10 learning remotes could not do.

[AnJam]

Thanks for the response, Dave.

Does your analysis mean that I should plan to continue to get my exercise in order to change channels - that the remotes won't work?

[dave w]

Thanks for the response, Dave.

Does your analysis mean that I should plan to continue to get my exercise in order to change channels - that the remotes won't work?

I don't know if X10 has fixed the inability of X10 remotes to reproduce U-Verse codes. You probably need to call X10. However the X10 Video Sender/Receiver transmit the remotes beam from video receiver back to video sender with out altering it. So your U-verse remote should work in the rooms where you have the receivers. Just carry the U-Verse remote with you.