Hi all,
my system is working for at least 15 years in the house , I had an old Ative Home at the beginning . I have a lot of modules , just to say I am not new to AHP .
For a while I was operating with both systems from 2 computers , I was probably too lazy to transfered all the commands ( ! ) , my old system was taking care of some modules and the new 3.228 was taking care of new modules that I was installing like outside sprinkler that was taking a lot of memory since in my area we can water the lawn on even date . I had to make a command for every day available of the summer , I was able to use the sprinkler , it took , I thought , a lot of memory .
I have a phase link module behind the dryer machine just in case . All was fine until ...
One day the old computer died and I transfered everything on the new 3.228 version . It says the memory is now used only up to 18% .
The problem is : it will light most of the time ( 98% ) and always shut down the lights as desired .
It does not dim the lights to the desired % everytime , but sometimes yes , these days most of the time no .
It's very annoying , I cleared the interface many times , and donwload again without any results ...
