Can the CM15A transmit RF to TM751 to turn on/off an LM465 code A5?

[leithalweapon]

I just bought AHP software. Here is my question. My house is 2 phase. I do not have a phase coupler so I use two TM751's, one on each phase, that way I can control all the lights in my house wirelessly. Obviously with the CM15A transmitting through AC wiring I can only control the lights on the phase that the CM15A is plugged into. Is it possible to get AHP and the CM15A to transmit with RF so I can control the lights on the phase that the CM15A is not plugged into?

Basically I want to use the CM15A to transmit using RF to a TM751 to turn on/off LM465 code A5.

[Brian H]

http://kbase.x10.com/wiki/Setting_The_CM15A_to_send_RF_Commands

[HA Dave]

Basically I want to use the CM15A to transmit using RF to a TM751 to turn on/off LM465 code A5.

Thats a GREAT link there from Brian H. Show you just how to do that. Helpful from me.

I messed around trying use X10... yet not couple my phases... for way too long myself. You can do it. But its a lot more fun when stuff just works.