Topic: AM466 Appliance Module Question (Read 17412 times)

evadorev · « **Reply #15 on:** July 04, 2010, 05:04:38 PM »

if it so, it`s a piece of sh!!

typically a fan motor

JeffVolp · « **Reply #16 on:** July 04, 2010, 07:05:48 PM »

Quote from: evadorev on July 04, 2010, 05:04:38 PM

if it so, it`s a piece of sh!!

typically a fan motor

Somehow, it seems that the difference between VA and watts is being lost on you...

Watts consumed versus power delivered is a measure of the efficiency (and perhaps quality) of the motor. Efficiency of this motor is similar to other fractional horsepower motors for which data is available.

Because of the reactive phase lag, current does not directly indicate efficiency, except that higher currents result in more copper losses and slightly lower efficiency.

None of this has any effect on the conclusion that an appliance module or any X10 relay switch designed to drive inductive loads should handle the load just fine.

Jeff

dave w · « **Reply #17 on:** July 05, 2010, 09:09:18 PM »

What happened to abc? Maybe he decided to finally try an Appliance Module and see what happens.

News:

Author Topic: AM466 Appliance Module Question (Read 17412 times)

evadorev

Re: AM466 Appliance Module Question

JeffVolp

Re: AM466 Appliance Module Question

dave w

Re: AM466 Appliance Module Question