Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[tybirdtybird]

DS7000 system and the two remotes Kr10a Sh624 are not controling the lamp modules everything was working great then it stop. The remote will arm and disalarm the system. I tried reset DS7000 reprogram the remote but didn't help. The system only 15 days old. we didn't plug in anything new not one thing change. I tested the lamp modules with mini controler they work fine.

Ty B

[Brian H]

Try turning the House Code and Unit code dials around a few times.
Seems we are seeing dials that are set to one address but are intermittent and the console thinks it is on a different address.

[tybirdtybird]

That didn't help. now it will not arm just hear the chimes going off. i also tried moving to other outlet didn't help.

[Brian H]

You could try a complete reset.
Remove battery and unplug from AC.
Wait a few minutes and start from scratch.

If you have not looked at the X10 wiki security console area.
http://kbase.x10.com/wiki/Protector_Plus_Wireless_Voice_Dialer_Security_System

Could also be a ask X10 for a replacemet exchange time.

[tybirdtybird]

I try that. then i saw somewhere here try power strip. going to try that to.

Thank you Brain for your help

Ty

[Brian H]

If you put the console on a power strip and it has a power line filter in it.
You will stop all X10 power line signals from reaching the lamp modules; that use the power line to receive signals.

[tybirdtybird]

The power strip works great