You can use iWatchMobile PRO to setup your Vanguard camera via it's on-screen display.
1. Run iWatchMobile PRO and select a Vanguard camera.
2. Click on the menu tab to open the menu, and then click on the presets icon to open the presets page.
3. The setup option is the second button with a wrench. (See attached picture) Click the setup button.
4. You will now see your live video, but with menu controls and a 'Clear Presets' button in the lower left-hand corner
5. Press 'Right Arrow' to open the Vanguard On-screen Display. 'Up Arrow' and 'Down Arrow' will scroll through a display option. 'Right Arrow' will select/accept a display option, and 'Left Arrow' will back out again.
6. Press 'Left Arrow' back out of each on-screen menu when done. Press 'Live' to go back to regular camera viewing with the usual Pan/Tilt controls.
Note, Regarding the other buttons on the Presets pane:
- The first button enters Focus/Iris mode. The Focus/Iris controls include controls for adjusting focus/iris settings, performing an autofocus, or centering the camera. Press 'Live' to return to regular camera viewing when done.
- The third button starts a camera sweep between all programmed presets. The camera will repeatedly sweep between all memorized presets. If you wish to clear the camera's presets, the clear camera preset command is avaailable on the setup page. If you wish to stop the continuous camera sweep, press any camera movement key (like 'Pan Left' or 'Tilt Up', or 'Zoom Out'.)
- The last button sets a camera preset. Press 'Set' to toggle into Set Preset mode, and then press the preset you wish to set. iWatchMobile PRO will signal the vanguard camera to memorize that preset position, and for ActiveHome Pro to take a snapshot of the current camera view and store it for that preset position.
Author
Topic: Vanguard/Sentinel Camera OSD in iWatchMobile PRO (Read 7618 times)