Wall switch (WS-467) controlling motion-activated outdoor floodlight?

[dave w]

I did reinstall the WS-467 wall switch again and it does now work as far as turning off/on power to the PR511. 

Oh boomer, you are asking for trouble. Listen to Dan and Brian. There are reasons why X10 says "Incandescent Lights Only" on the instructions, on the web site, and on the switch label.

[Coyotefred]

When setting up a module to control the XPS3 via AHP, what's the recommended "module" setting...I'm not seeing XPS3 in the pull-down menu, but some of the texts runs outside the window...  thanks!

[Brian H]

In the module subcategories.
There is a Pro Series module list.
It is in that section of the modules choices. I just looked and it is in the Pro Line section.

X10 WS13A is the X10 version of the XPS3

[Coyotefred]

Hmmmm...I'm into the Pro Modules list and the only ones I see there that appear close are the "Pro Wall Switch Appliance M[cut off]" and the PRO Companion Switch???

[Brian H]

Pro Wall Switch Appliance M 'odule' is cut off.

[Dan Lawrence]

Pro Wall Switch Appliance M 'odule' is cut off.

Did you mean Pro Wall Switch Appliance M "odule" is cut off.

Coyotefred needs to be more specific.  What version of AHP is he running.  My 3.305 shows it fully in the Pro Modules section.

[Brian H]

Dan; In 3.305 if you uses the choice edit and add module. You see exactly what was reported.
If you use the modules list. It does show the whole thing.
Maybe he is using the edit and add module choice.

I learned something new myself. I was always using the edit and add module method.
I now know you can also use the module drop down list and drag a module to the room and add it.

[Dan Lawrence]

Dan; In 3.305 if you uses the choice edit and add module. You see exactly what was reported.
If you use the modules list. It does show the whole thing.
Maybe he is using the edit and add module choice.

I learned something new myself. I was always using the edit and add module method.
I now know you can also use the module drop down list and drag a module to the room and add it.

Thou art correct.  The result is you do get the proper module.