RF switches and remotes will often produce multiple commands for a single keypress. There are numerous situtations where this is not acceptable. One example of this is where an RF Switch/Remote is used to trigger a macro. Here is a solution that Allows only one command to be forwarded.
A1 - Phantom Module 1 (RF Switch SS13A sends commands)
A2 - Module 2 Implemented in software, not physically present(Used to trigger other Macros)
Macro1 Power On:
Trigger: A1 On
Condition: A2 Off
Action:
- Send A2 On
- Delay 5 seconds (set to your preference)
Macro2 Power Off:
Trigger: A1 Off
Condition: A2 On
Action:
- Send A2 Off
- Delay 5 seconds (set to your preference)
A2 can now be used as a trigger for your macro
