Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[j_internet]

Hi,
 
I have had one WS13A (with CompactFluorescent bulbs ) for a few weeks without issue.  Always can turn on and off using a PL513/PSC04.  I now added another WS13A on a different circuit.  It seems as long as I start/have them OFF one of them will turn on/off without issue (either one).

 If I have one ON then MOST of the time I turn the other one ON OK but, I always have issues where I cant turn off either then. 

Going back to one switch I dont have an issue and I can turn on / off without issue.  I have tried to change from A,B,C and !,2,3 with the same results.  Any suggestions so that they dont conflict?

Thanks !!    

[Brian H]

Marginal power line signals.
CFLs are probably making power line noise when On. Enough so you loose control.
Electronic devices absorbing power line signals {Signal Suckers}.
PSC04 on one phase of the homes wiring and the WS13As on the other. With no phase coupling between the phases.
Here are some links to troubleshooting.
http://forums.x10.com/index.php?topic=9899.msg57946
http://forums.x10.com/index.php?PHPSESSID=fia4somvt646m1f9ar60hogk94&topic=7951.0
http://jvde.us/x10_troubleshooting.htm
http://www.act-remote.com/PCC/uncle.htm
http://www.davehouston.net/noise.htm
http://www.davehouston.net/coupling.htm