Please login or register.

Login with username, password and session length

Author Topic: Wall switch controller recommendations?  (Read 4342 times)

sroberts

  • Jr. Member
  • **
  • Helpful Post Rating: 0
  • Posts: 22
Wall switch controller recommendations?
« on: May 09, 2011, 01:38:46 PM »

I need to use wall switches that are "friendly" to those used to using conventional switches.  I'm using a couple XP4's but I'm not happy with them, the small buttons don't have a good feel, are near impossible to label, and their small size makes them a bit unfriendly IMHO.  If I can't find anything else I'll probably switch to XP2's which no-doubt have the same feel.

A wired version of the SS14A that could fit into a Decora plate would be ideal, though that probably isn't an option.


The X10 Leviton Decora style switches look good however I need to get at least 2 switches per gang.

Any recommendations?  I'm guessing this ground has been tread many times before.
Steve
« Last Edit: May 09, 2011, 01:40:37 PM by sroberts »
Logged

B.A.

  • Sr. Member
  • ****
  • Helpful Post Rating: 2
  • Posts: 115
Re: Wall switch controller recommendations?
« Reply #1 on: May 09, 2011, 03:32:18 PM »

Have you looked at the Insteon Keypadlinc?
I use the 8 button one for setting scenes in my kitchen and love it.
Mine transmits X10 signals no problem,  but doesn't always receive them ( I may need to add a couple filters to my system)

http://www.smarthome.com/2486SWH6/KeypadLinc-Relay-INSTEON-6-Button-Scene-Control-Keypad-with-On-Off-Switch-Non-Dimming-White/p.aspx
Logged

sroberts

  • Jr. Member
  • **
  • Helpful Post Rating: 0
  • Posts: 22
Re: Wall switch controller recommendations?
« Reply #2 on: May 09, 2011, 04:15:19 PM »

The keypadlink buttons look too small to effectively label, however I found that Leviton makes keypads with plastic covers that can easily be labeled. 
I'm guessing they're not compatible with the XPT and I need to buy the Leviton 16400 controller since the 16400 needs to receive commands in order to manage the LEDs.

« Last Edit: May 09, 2011, 05:11:24 PM by sroberts »
Logged

Knightrider

  • Community Organizer
  • Hero Member
  • ***
  • Helpful Post Rating: 62
  • Posts: 1748
  • I love my WM100!
    • This Automated House
Logged
Remote control is cool,

but automation rules!

sroberts

  • Jr. Member
  • **
  • Helpful Post Rating: 0
  • Posts: 22
Re: Wall switch controller recommendations?
« Reply #4 on: May 12, 2011, 02:41:03 PM »

Due to the Wife Appreciation Factor I'm sticking with the XP4.  She contends any kind of labeling looks hokey, LEDs are definitely out, and the unassuming XP4 is the best looking of them all.    Naturally she's right (she is the wife).   Icing on the cake is the XP4+XPT is darned cheap compared to the others and has been fully reliable.
Logged

Alish

  • Guest
Re: Wall switch controller recommendations?
« Reply #5 on: May 15, 2011, 11:48:19 AM »

Due to the Wife Appreciation Factor I'm sticking with the XP4.  She contends any kind of labeling looks hokey, LEDs are definitely out, and the unassuming XP4 is the best looking of them all.    Naturally she's right (she is the wife).   Icing on the cake is the XP4+XPT is darned cheap compared to the others and has been fully reliable.

I think you should accept your wife offer, atlast she's is your wife and also her suggestion is also good not bad one XP4+XPT is cheap and reliable if you compare to others.
Logged

dave w

  • Community Organizer
  • Hero Member
  • ***
  • Helpful Post Rating: 139
  • Posts: 6116
Re: Wall switch controller recommendations?
« Reply #6 on: May 15, 2011, 05:19:04 PM »


I think you should accept your wife offer,

 :o  There is a choice?...darn, I didn't know that.
Logged
"This aftershave makes me look fat"
 

X10.com | About X10 | X10 Security Systems | Cameras| Package Deals
© Copyright 2014-2016 X10.com All rights reserved.