Please login or register.

Login with username, password and session length

Author Topic: AHP module icon "behavior"  (Read 2777 times)

pomonabill221

  • Hero Member
  • *****
  • Helpful Post Rating: 13
  • Posts: 239
AHP module icon "behavior"
« on: May 23, 2011, 06:00:18 PM »

I have tried to find an answer to this question and have not been successful.
  When in AHP, if a module is clicked while the cursor is a "open hand" rather than a "pointed finger", the module icon "lifts up" and changes color.
  My icons are normally grey background, but when clicked and "lifted", they change to orange.
  What does this mean?
  thanks!!!
Logged

Noam

  • Community Organizer
  • Hero Member
  • ***
  • Helpful Post Rating: 51
  • Posts: 2818
Re: AHP module icon "behavior"
« Reply #1 on: May 23, 2011, 08:39:44 PM »

That's the "active"  module that you are currently making changes to.
Logged

pomonabill221

  • Hero Member
  • *****
  • Helpful Post Rating: 13
  • Posts: 239
Re: AHP module icon "behavior"
« Reply #2 on: May 24, 2011, 01:24:58 AM »

  I don't think that the color change has anything to do with "active module that I am making changes to".
I can change the HCUC, name, etc., and the color does NOT change.
  There must be something else that the color change/"lifts up" means....
Try it for yourself....
  click on the module when the pointer icon is an open hand.  the module background changes color and it appears to "lift" off the "desktop" or window.
  Then click on it again and the color will change back and it will "drop" back to the "desktop".
  Then change the name of the module, change the HCUC, turn it on or off..... anything where the pointer icon is a pointing finger, and the module does NOT change color or "lift".
  Could this be a "feature" that was thought of and didn't go anywhere?
  hhmmmm.....
« Last Edit: May 24, 2011, 01:29:23 AM by pomonabill221 »
Logged

Noam

  • Community Organizer
  • Hero Member
  • ***
  • Helpful Post Rating: 51
  • Posts: 2818
Re: AHP module icon "behavior"
« Reply #3 on: May 24, 2011, 06:46:13 AM »

It makes it easier for you to remember which module you are working on, that's all. You CAN make changes without "popping" it up, but you can only pop" one module up at a time.
Logged

pomonabill221

  • Hero Member
  • *****
  • Helpful Post Rating: 13
  • Posts: 239
Re: AHP module icon "behavior"
« Reply #4 on: May 24, 2011, 02:25:18 PM »

OK... I see.
  Just curious as to why this was happening, and wanted to know if this was changing anything like temporarily disabling the module or setting something special like "don't store in interface" or "run locally".
Thanks for the info!
Logged
 

X10.com | About X10 | X10 Security Systems | Cameras| Package Deals
© Copyright 2014-2016 X10.com All rights reserved.