Please login or register.

Login with username, password and session length

Author Topic: Alarm volume very low  (Read 8229 times)

rbtcos

  • Newbie
  • Helpful Post Rating: 2
  • Posts: 6
Alarm volume very low
« on: August 30, 2011, 05:31:09 PM »

Is there a way to increase the volume on the alarm included with the clock? The alarm is so low it is almost inaudible wile laying down.
Logged

AirPadFan

  • Newbie
  • Helpful Post Rating: 1
  • Posts: 7
Re: Alarm volume very low
« Reply #1 on: August 30, 2011, 06:05:43 PM »

Are you covering the speaker when you lay it down?
Logged

rbtcos

  • Newbie
  • Helpful Post Rating: 2
  • Posts: 6
Re: Alarm volume very low
« Reply #2 on: August 30, 2011, 09:22:20 PM »

No just describing a normal position. With the tablet set up on edge not laying flat, the volume is almost the same volume as the Alicia Keys song (included with the tablet) set with the sound bar end set under the e in Media.

Media volume
|||
Logged

YB

  • Hero Member
  • *****
  • Helpful Post Rating: 3
  • Posts: 173
  • Coders Are The Only True Evils In This World...
    • X10 WTI
Re: Alarm volume very low
« Reply #3 on: August 31, 2011, 12:57:37 PM »

Logged
Michael Youngblood
Web Designer

rbtcos

  • Newbie
  • Helpful Post Rating: 2
  • Posts: 6
Re: Alarm volume very low
« Reply #4 on: August 31, 2011, 04:26:11 PM »

I installed master controll volume and set it to max all. The alarm volume did increase but it is still about as loud as the music set to half volume.
Logged

YB

  • Hero Member
  • *****
  • Helpful Post Rating: 3
  • Posts: 173
  • Coders Are The Only True Evils In This World...
    • X10 WTI
Re: Alarm volume very low
« Reply #5 on: August 31, 2011, 05:33:23 PM »

interesting. ok. one last thing to try.

ok, go to settings, sound, volume


that should bring up a menu with three bars, one labeled alarm. hopefully that is turned all the way up.


and on that note, part of the alarm features is that it starts off lower then max, and then increases the volume as you let it go.
Logged
Michael Youngblood
Web Designer

Tuicemen

  • Administrator
  • Hero Member
  • ****
  • Helpful Post Rating: 283
  • Posts: 10509
  • I don't work for X10, I use it successfuly!
Re: Alarm volume very low
« Reply #6 on: August 31, 2011, 05:38:23 PM »

part of the alarm features is that it starts off lower then max, and then increases the volume as you let it go.
I like that feature.
I like a alarm to start off subtle unless it is a security one!
Logged
Please Read Topic:
General Forum Etiquette
Before you post!

rbtcos

  • Newbie
  • Helpful Post Rating: 2
  • Posts: 6
Re: Alarm volume very low
« Reply #7 on: September 02, 2011, 03:05:00 AM »

The first thing I tried was "settings, sound, volume" before posting. I let the alarm sound until it said "allarm silenced after one minute" and did not notice any increase in volume as time passed.
I did not let it ring long before I installed master controll volume maybe it affected the increase in volume feature or maybe it's my unit because i am having other issues that I will post about.
Logged
 

X10.com | About X10 | X10 Security Systems | Cameras| Package Deals
© Copyright 2014-2016 X10.com All rights reserved.