Please login or register.

Login with username, password and session length

Author Topic: Sump pump on a SR227  (Read 2017 times)

liderbug

  • Full Member
  • ***
  • Helpful Post Rating: 0
  • Posts: 52
Sump pump on a SR227
« on: October 05, 2011, 11:56:26 AM »

This is killing me - SR227 with a sump pump attached.   Turns on 100% of commands, off 50% - which causes the tank to empty in 30 minutes not 7 days.  I searched for "motors" not a lot of luck.  Interference ???? from the pump?  Suggestions?

Thanks

Logged

Noam

  • Community Organizer
  • Hero Member
  • ***
  • Helpful Post Rating: 51
  • Posts: 2818
Re: Sump pump on a SR227
« Reply #1 on: October 05, 2011, 12:03:09 PM »

It does sound like noise to me.
Did it suddenly stop working, or has it always been a problem?
If so, what else may have changed in your home?
New electronics, and even failing (or brand-new) CFL bulbs can introduce noise into your system.

However, if the pump ALWAYS turns on, but only turns off half the time, I would look at the pump first.
As a simple test, unplug the pump, and plug in a simple (incandescent) lamp. Run your signal tests, and see if it always works. If so, try plugging the pump in through a filter.

Are you able to correlate the working/not working to specific times of the day? Perhaps a light or other device that is on only at night is causing the interference.
Logged

liderbug

  • Full Member
  • ***
  • Helpful Post Rating: 0
  • Posts: 52
Re: Sump pump on a SR227
« Reply #2 on: October 05, 2011, 11:54:46 PM »

I put a filter (don't ask part number x10.som'm) and I've gone the afternoon on/off every 30 minutes - time will tell. 
Logged
 

X10.com | About X10 | X10 Security Systems | Cameras| Package Deals
© Copyright 2014-2016 X10.com All rights reserved.