Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[nabril15]

good morning
I am trying to program a new LM15a with a new code using my MT13A, but it wont register.
I have the lamp (with incadescent bulb) plugged into the same outlet as the MT13A. I turned on the default code of 1, and the light came on, so I know the LM15A works fine.

any suggestions? Sure I can use code 1, but I want to give it another number. And I may use a couple of LM15's and I dont want them all as code 1.

Thanks

[Brian H]

You have about thirty seconds to reprogram it after you first apply power.
So in a table lamp and MT13A in the same outlet. Turn On the table Lamps switch and using the MT13As button of choice. Send an ON three or more times.
http://kbase.x10.com/wiki/Programming_Your_Socket_Rocket

[nabril15]

yeap. tried that. followed directions.
turned lamp on, and within seconds, pressed 6-ON on the MT13a 3 times, but nothing. Tried 7 and 8 and same result.
I used a different lamp, and it worked. I pressed ON 3 times, and then OFF and then the light came on.
Hmm.


Thanks Brian

[Brian H]

The lamp in question doesn't have a built in dimmer switch does it?

[nabril15]

no it doesnt. Straight on/off.