Please login or register.

Login with username, password and session length

Author Topic: Switching transformer block signals  (Read 3142 times)

Mavrik

  • Full Member
  • ***
  • Helpful Post Rating: 0
  • Posts: 49
Switching transformer block signals
« on: October 27, 2011, 11:22:40 AM »

I noticed that anytime I plug in a switching transformer anywhere in the house it blocks X10 signals. Some block when plugged in and off, others block when on.  Is there a mod that can be done to the transformers?
Logged

JeffVolp

  • Community Organizer
  • Hero Member
  • ***
  • Helpful Post Rating: 122
  • Posts: 2299
    • XTB Home Page
Re: Switching transformer block signals
« Reply #1 on: October 27, 2011, 11:30:20 AM »

Is there a mod that can be done to the transformers?

Yes, isolate it with a X10 Pro XPPF filter.

See this report on a cellphone charger that is a horrendous noise source:

    http://jvde.us/x10/x10_cellet_noise.htm

Jeff
Logged
X-10 automation since the BSR days

Brian H

  • Community Organizer
  • Hero Member
  • ***
  • Helpful Post Rating: 305
  • Posts: 13295
Re: Switching transformer block signals
« Reply #2 on: October 27, 2011, 12:39:12 PM »

I would also say XPPF or another brand X10 type power filter is needed. For that switching supply.
Logged

Mavrik

  • Full Member
  • ***
  • Helpful Post Rating: 0
  • Posts: 49
Re: Switching transformer block signals
« Reply #3 on: October 27, 2011, 12:50:41 PM »

Do you have an electronics diagram?  ;D
Logged

Brian H

  • Community Organizer
  • Hero Member
  • ***
  • Helpful Post Rating: 305
  • Posts: 13295
Re: Switching transformer block signals
« Reply #4 on: October 27, 2011, 01:41:21 PM »

Probably easier to just buy a X10 designed filter than make one.

There are some filter schematics on this site.
Leviton 6287 and 6288. ACT AF120.
http://www.idobartana.com/hakb/index.htm

The Smarthome FilterLinc
http://home.comcast.net/~gafield/family/gary/electronics/X10_Filter.pdf

If you do build a filter. Use capacitors rated for power line use. Some standard ones can short out or open up.

There would be very little you can do directly to the switching supply itself.
« Last Edit: October 27, 2011, 02:03:42 PM by Brian H »
Logged

Mavrik

  • Full Member
  • ***
  • Helpful Post Rating: 0
  • Posts: 49
Re: Switching transformer block signals
« Reply #5 on: October 27, 2011, 03:50:35 PM »

Thank you
Logged

dhouston

  • Advanced Member
  • Hero Member
  • ******
  • Helpful Post Rating: 37
  • Posts: 2547
    • davehouston.org
Re: Switching transformer block signals
« Reply #6 on: October 27, 2011, 04:32:30 PM »

I noticed that anytime I plug in a switching transformer anywhere in the house it blocks X10 signals. Some block when plugged in and off, others block when on.  Is there a mod that can be done to the transformers?
There's nothing you can do to the transformers themselves - as others have suggested you can use a filter.

What voltage/current rating are the transformers that are giving you trouble? Part Number?

I tested 3 that are X-10 friendly. I'll try to find the PN for one that came from Mouser as well as another from another supplier - I may have published them in my article on X-10 noise. This one from Smart Fun was OK...

However, there's no guarantee that one you buy today will have the same internals. Still, it might be helpful to start a list of those known to be friendly/unfriendly.

EDIT: Well, d'uh - I wrote a short article about SMPS and X-10, listing both those referenced above.
« Last Edit: October 27, 2011, 04:36:49 PM by dhouston »
Logged
This message was composed entirely from recycled letters of the alphabet using only renewable, caffeinated energy sources.
No twees, wabbits, chimps or whales died in the process.
https://www.laser.com/dhouston
 

X10.com | About X10 | X10 Security Systems | Cameras| Package Deals
© Copyright 2014-2016 X10.com All rights reserved.