I now have a Outdoor XX52A Airsight and have started a
thread for the review.
I have submitted several suggestions for improvements which were forwarded to the manufacture.
The suggestions are all web interface related here what I've suggested thus far:
1: Make the web interface universal, include pan tilt control and all options for any of the Airsights that way you can control all options for a camera no matter which one you have logged into (as long as you have the privileges).
2: include the option to send a web command on motion detection similar to a email alert.
this way you could tell another camera to move to a set point.
this would also allow it to trigger a event with the new WiFi module once it is released.
There are other possibilities this would open up as many software have web command abilities
3: Add the option to turn off the IR light (not sure if this can be done might need a hard ware change)
this causes colors to be off compared to cameras that have this function.
4: Add the option to use no-ip.biz as a DDNS (this is a free service) or for the user to be able to type in a specific DDNS
The manufactures DDNS doesn't work for me, I get a error connecting showing in the status screen (this might be my flaky router)
5: Beef up security(i'm not going into details here)
6: When switching to other cameras display that cameras alias