Please login or register.

Login with username, password and session length

Author Topic: Active Home Pro-My house on line issue  (Read 4567 times)

Mic_

  • Hero Member
  • *****
  • Helpful Post Rating: 0
  • Posts: 195
Active Home Pro-My house on line issue
« on: March 14, 2013, 07:22:04 PM »

what does the newer version of Active Home pro offer that the old doesn't?

When I click my house service from Active home pro; I am not able to connect even though I set up my profile; any ideas?

I am not able to connect to my house on line while I am away from home using another (other than home computer) computer; i don't know why.

I might add that I am able to access with my smart phone just fine; any on the above? Thanks all
Logged

Dan Lawrence

  • Hero Member
  • *****
  • Helpful Post Rating: 68
  • Posts: 3991
Re: Active Home Pro-My house on line issue
« Reply #1 on: March 14, 2013, 09:00:46 PM »

what does the newer version of Active Home pro offer that the old doesn't?

When I click my house service from Active home pro; I am not able to connect even though I set up my profile; any ideas?

I am not able to connect to my house on line while I am away from home using another (other than home computer) computer; i don't know why.

I might add that I am able to access with my smart phone just fine; any on the above? Thanks all

What version of AHP are you using?      More information is needed.
Logged
I don't SELL this stuff... BUT I sure do ENJOY using it!!!

Brian H

  • Community Organizer
  • Hero Member
  • ***
  • Helpful Post Rating: 305
  • Posts: 13295
Re: Active Home Pro-My house on line issue
« Reply #2 on: March 15, 2013, 06:07:29 AM »

http://www.x10.com/support/rev_ahp.htm

3.302 added a new Lamps Tab for Soft Start Lamp and Wall Switches.
Older modules also had their own Tab. lder Lamps (Before Soft Start).
« Last Edit: March 15, 2013, 06:13:46 AM by Brian H »
Logged

Mic_

  • Hero Member
  • *****
  • Helpful Post Rating: 0
  • Posts: 195
Re: Active Home Pro-My house on line issue
« Reply #3 on: March 15, 2013, 06:22:24 AM »

 My version of Active Home pro is 3.318
Logged

Mic_

  • Hero Member
  • *****
  • Helpful Post Rating: 0
  • Posts: 195
Re: Active Home Pro-My house on line issue
« Reply #4 on: April 13, 2013, 07:55:48 PM »

Question; I don't always get good reception from my wireless camera transmitters; anything cn be done to boose camera signals, or help the reception?
Logged

Brian H

  • Community Organizer
  • Hero Member
  • ***
  • Helpful Post Rating: 305
  • Posts: 13295
Re: Active Home Pro-My house on line issue
« Reply #5 on: April 14, 2013, 09:34:59 AM »

In another thread. You mentioned an XX36 IP type.
Are they the ones with the reception problems or do you also have some of the X10 2.4 GHz ones also?
I have seen external wi-fi antennas and signal boosters.
Not sure how a booster would handle the video feed.
« Last Edit: April 14, 2013, 10:10:01 AM by Brian H »
Logged

Mic_

  • Hero Member
  • *****
  • Helpful Post Rating: 0
  • Posts: 195
Re: Active Home Pro-My house on line issue
« Reply #6 on: April 16, 2013, 02:32:28 PM »

The reception issue I am talking about here is with the earlier X10 2.4GHz cams. I am having a some reception issues...Not sure what can be done...
« Last Edit: April 16, 2013, 02:34:00 PM by Mic_ »
Logged

Mic_

  • Hero Member
  • *****
  • Helpful Post Rating: 0
  • Posts: 195
Re: Active Home Pro-My house on line issue
« Reply #7 on: April 24, 2013, 02:09:08 PM »

Same x2 camera system; Does anyone know why (on a system with several cameras) why some cameras can not be switched? When said camera is plugged in it takes over other camera transmissions....
Logged

Brian H

  • Community Organizer
  • Hero Member
  • ***
  • Helpful Post Rating: 305
  • Posts: 13295
Re: Active Home Pro-My house on line issue
« Reply #8 on: April 24, 2013, 02:52:33 PM »

Power line signal problems to the addressable power suppies or you are using more than one four address Unit Group.
Only one can be on at a time. They default to On at power up.
They are addressed with the same House Code and in groups of four Unit Codes. 1-4,5-8,9-12 and 13-16. Turn one On the other three go off.
Now if you have more than four cameras and are using more then one Unit Group. You have to turn Off the active camera in one group and then turn the one you want to use On.
If you are using more than one House Code for the cameras. Same thing. Turn Off the active camera and then turn On the one you want to use.
Logged
 

X10.com | About X10 | X10 Security Systems | Cameras| Package Deals
© Copyright 2014-2016 X10.com All rights reserved.