Contact | X10.com
Please login or register.

Login with username, password and session length

Author Topic: Alarm timeout  (Read 4552 times)

coolshare

  • Newbie
  • Helpful Post Rating: 0
  • Posts: 8
Alarm timeout
« on: October 26, 2012, 07:12:09 PM »
I have a securiLink and used a external siren controlled by an Universal model.
I am looking for a way to shut off the siren after, say 2 minutes. SecuritLink does not stop sending on/off serious of x10 signal ....
In case none disarm the system, its noise could make a problem in the neighborhood.

Is there anyway to have a timeout so that the alarm goes off after a set period like a car alarm?

thanks
Logged

dave w

  • Community Organizer
  • Hero Member
  • ***
  • Helpful Post Rating: 139
  • Posts: 6116
Re: Alarm timeout
« Reply #1 on: October 26, 2012, 09:27:40 PM »
Logged
"This aftershave makes me look fat"

coolshare

  • Newbie
  • Helpful Post Rating: 0
  • Posts: 8
Re: Alarm timeout
« Reply #2 on: October 29, 2012, 03:31:58 AM »
Cool - I will try it out. The problem with SecuriLink is that the module stay on the "on" position after 4 minutes of on-and-off serial of signal. So using this timer may be able to shut the last "on" to off.

thanks
Logged

Brian H

  • Community Organizer
  • Hero Member
  • ***
  • Helpful Post Rating: 305
  • Posts: 13295
Re: Alarm timeout
« Reply #3 on: November 02, 2012, 11:20:44 AM »
The other way is to use a PH508 or SH10A Large or Small Powerhorn. Modified to drive a relay.
A search here will find some mods to drive an external Siren until the SC1200s On Off sequence stops.
Logged
 

X10.com | About X10 | X10 Security Systems | Cameras| Package Deals
© Copyright 2014-2016 X10.com All rights reserved.