Please login or register.

Login with username, password and session length

Author Topic: disable local dimming on wall switch?  (Read 8792 times)

kevinv

  • Full Member
  • ***
  • Helpful Post Rating: 0
  • Posts: 36
disable local dimming on wall switch?
« on: November 28, 2015, 07:28:38 AM »

Anyone ever see a mod to disable the local dimming funcion on a wall switch?
Thanks!!!
Logged

Brian H

  • Community Organizer
  • Hero Member
  • ***
  • Helpful Post Rating: 305
  • Posts: 13295
Re: disable local dimming on wall switch?
« Reply #1 on: November 28, 2015, 07:50:45 AM »

From your other post. Your description sounds like an X10 WS12A.
It is basically a WS467 with a paddle and frame added. The WS467 did not have local dimming control and I did see a modification to add it. By jumping out a resistor.

I have no idea if this would work but I believe replacing the jumper in a WS12A model with the resistor would remove local dimming.

I will see if I can find any further information. I may still have a WS12A left over from my conversion to Insteon in a storage box.

« Last Edit: November 28, 2015, 08:28:29 AM by Brian H »
Logged

Knightrider

  • Community Organizer
  • Hero Member
  • ***
  • Helpful Post Rating: 62
  • Posts: 1748
  • I love my WM100!
    • This Automated House
Re: disable local dimming on wall switch?
« Reply #2 on: November 28, 2015, 11:04:54 AM »

I thought the newer ones with soft start did have local dim. Why do you want to disable? Using these with anything other than an incandescent load is a bad idea.
Logged
Remote control is cool,

but automation rules!

Brian H

  • Community Organizer
  • Hero Member
  • ***
  • Helpful Post Rating: 305
  • Posts: 13295
Re: disable local dimming on wall switch?
« Reply #3 on: November 28, 2015, 11:34:20 AM »

It looks like the new soft start model WS467s also have local dim control and preset dim. My thoughts are also surface mounted components and different schematics. So my resistor in place of a jumper. May only apply to the older before soft start models.
http://kbase.x10.com/wiki/Newer_Wall_Switches_and_Preset_Dim

My stock is mostly old stuff. Kind of like their owner.  :'
« Last Edit: November 28, 2015, 12:31:01 PM by Brian H »
Logged

kevinv

  • Full Member
  • ***
  • Helpful Post Rating: 0
  • Posts: 36
Re: disable local dimming on wall switch?
« Reply #4 on: November 28, 2015, 06:13:16 PM »

Thanks all!!!

I want to disable local dim b/c for some reason-  when I turn the light on or off I end up dimming it a little and that gets annoying :)

Thanks again for the ideas!
Logged

bkenobi

  • PI Expert
  • Hero Member
  • ******
  • Helpful Post Rating: 24
  • Posts: 2082
Re: disable local dimming on wall switch?
« Reply #5 on: November 29, 2015, 02:35:15 PM »

Same here.  I hate local dimming because I never intentionally use it... though apparently I'm an avid user  B:(

Brian H

  • Community Organizer
  • Hero Member
  • ***
  • Helpful Post Rating: 305
  • Posts: 13295
Re: disable local dimming on wall switch?
« Reply #6 on: November 29, 2015, 03:48:22 PM »

Do the WS12A switches you want to remove the local dim control, have soft start. Where they ramp On and Off in a few seconds?
Logged

kevinv

  • Full Member
  • ***
  • Helpful Post Rating: 0
  • Posts: 36
Re: disable local dimming on wall switch?
« Reply #7 on: December 19, 2015, 09:01:38 AM »

yeah they have softstart.  I like softstart,  don't like local dimming   :)
Logged

bkenobi

  • PI Expert
  • Hero Member
  • ******
  • Helpful Post Rating: 24
  • Posts: 2082
Re: disable local dimming on wall switch?
« Reply #8 on: December 21, 2015, 11:26:46 AM »

Soft start would be fine if it were faster and didn't have local dimming.  I just picked up a Cooper brand motion sensor switch that works really nice.  It does the soft start thing, but it's faster so it doesn't seem quite so annoying.
 

X10.com | About X10 | X10 Security Systems | Cameras| Package Deals
© Copyright 2014-2016 X10.com All rights reserved.